Zoomlion ZD220-3 vs Shantui DH24C3: the two differ on 61 of 77 listed specs. The main differences are Engine (Weichai 217 HP vs Weichai 265 HP), Price (₹1.20 – 1.40 Cr vs ₹1 – 1.20 Cr), Operating Weight (23,400 kg vs 23,820 kg), Weight (23400 kg vs 23820 kg). The other 16 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Zoomlion ZD220-3
Shantui DH24C3
Zoomlion ZD220-3
VS
Shantui DH24C3
Dozer
Zoomlion ZD220-3 vs Shantui DH24C3: the two differ on 61 of 77 listed specs. The main differences are Engine (Weichai 217 HP vs Weichai 265 HP), Price (₹1.20 – 1.40 Cr vs ₹1 – 1.20 Cr), Operating Weight (23,400 kg vs 23,820 kg), Weight (23400 kg vs 23820 kg). The other 16 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Zoomlion ZD220-3
₹1.20 – 1.40 Cr
Shantui DH24C3
₹1 – 1.20 Cr
Particulars
Zoomlion ZD220-3
Shantui DH24C3
Shantui DH24C3 vs Zoomlion ZD220-3: two big dozers with nearly the same blade size
The Shantui DH24C3 and the Zoomlion ZD220-3 carry almost the same blade capacity, 6.5 m³ against 6.4 m³. But the DH24C3 leads on power and pushing force, at 265 HP against 217 HP, with a drawbar pull of 368 kN against 178 kN. It also runs a hydrostatic drive for smooth, stepless speed control, and sinks a little less on soft ground, since its ground bearing pressure is lower. The ZD220-3 uses a conventional powershift transmission that most mechanics already know, though it has no ripper option, while the DH24C3 offers one.
Pick the DH24C3 where you want more raw power and a ripper option in reserve, and you are ready to support its newer hydrostatic drive. Pick the ZD220-3 where a familiar, conventional driveline matters more than the extra output, in a similar blade-size class. Both are construction dozers in our dozer range. Compare more pairs on the dozer comparison hub, or read the bulldozer guide.
Shantui DH24C3
Pros:
More powerful at 265 HP with more torque and 368 kN of drawbar pull
Sinks less on soft ground, with a ground bearing pressure of 68.3 kPa against the ZD220-3's 71 kPa
Narrower overall width at 3,642 mm, easier to work in tight spaces than the ZD220-3
Hydrostatic drive gives smooth, stepless speed control
Optional ripper available for hard ground
Cons:
Hydrostatic driveline is newer technology, so fewer local mechanics outside the dealer network know it yet
Slightly heavier at 23,820 kg
Longer overall length at 5,940 mm than the ZD220-3, needs a bit more room to maneuver
Zoomlion ZD220-3
Pros:
Conventional powershift transmission that most local mechanics already know
Shorter overall length at 5,546 mm, easier to maneuver in tight yards
No need for specialised hydrostatic driveline support
Blade capacity of 6.4 m³ nearly matches the DH24C3's 6.5 m³
Cons:
Less powerful at 217 HP against the DH24C3's 265 HP
Higher ground bearing pressure at 71 kPa, sinks more on soft ground than the DH24C3
No ripper option, so it cannot break up hard ground on its own
Wider overall width at 3,725 mm than the DH24C3
Pros:
Cons:
Closing Recommendation
The Shantui DH24C3 is the steadier choice where the job needs more raw power and a ripper option in reserve, and you are ready to support its newer hydrostatic drive. The Zoomlion ZD220-3 suits sites where a familiar, conventional driveline and a shorter body for tight spaces matter more than the extra output. So match the machine to your work: Shantui DH24C3 for higher power and a ripper option, Zoomlion ZD220-3 for familiar controls in tighter spaces.
Zoomlion ZD220-3 Vs Shantui DH24C3 Dozer Price, Technical Specifications & Features
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
The Shantui DH24C3 is a 23.8-tonne construction crawler dozer powered by a 265 HP engine. Its 6.5 m³ blade provides substantial material-moving capacity, while the 368 kN drawbar pull gives strong pushing force for larger earthwork. An optional ripper adds capability when harder patches appear. Ground bearing pressure is 68.3 kPa, and ground clearance reaches 540 mm. Rated gradeability of 30 degrees supports sloped-site applications. The DH24C3 is the largest of Shantui's DH-series construction dozers listed here. Large-plot development and highway earthwork are suitable applications where blade volume affects daily output. A 489-litre fuel tank supports a full working shift. The Shantui DH24C3 bulldozer price is ₹1 crore to ₹1.20 crore. Contractors can consider this dozer machine when smaller models cannot move enough material per pass. Its operating weight places it close to entry-level mining equipment, but its role remains construction earthwork. The optional ripper provides flexibility for changing soil conditions. Buyers working on highway projects can compare its blade capacity and drawbar pull with the DH17B3 before selecting the larger machine. The DH24C3 suits contractors who need higher output across large grading areas without moving fully into mining-class crawler dozers.
Agency review
Planning to buy the Zoomlion ZD220-3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Shantui DH24C3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Shantui DH24C3 vs Zoomlion ZD220-3: two big dozers with nearly the same blade size
The Shantui DH24C3 and the Zoomlion ZD220-3 carry almost the same blade capacity, 6.5 m³ against 6.4 m³. But the DH24C3 leads on power and pushing force, at 265 HP against 217 HP, with a drawbar pull of 368 kN against 178 kN. It also runs a hydrostatic drive for smooth, stepless speed control, and sinks a little less on soft ground, since its ground bearing pressure is lower. The ZD220-3 uses a conventional powershift transmission that most mechanics already know, though it has no ripper option, while the DH24C3 offers one.
Pick the DH24C3 where you want more raw power and a ripper option in reserve, and you are ready to support its newer hydrostatic drive. Pick the ZD220-3 where a familiar, conventional driveline matters more than the extra output, in a similar blade-size class. Both are construction dozers in our dozer range. Compare more pairs on the dozer comparison hub, or read the bulldozer guide.
Shantui DH24C3
Pros:
More powerful at 265 HP with more torque and 368 kN of drawbar pull
Sinks less on soft ground, with a ground bearing pressure of 68.3 kPa against the ZD220-3's 71 kPa
Narrower overall width at 3,642 mm, easier to work in tight spaces than the ZD220-3
Hydrostatic drive gives smooth, stepless speed control
Optional ripper available for hard ground
Cons:
Hydrostatic driveline is newer technology, so fewer local mechanics outside the dealer network know it yet
Slightly heavier at 23,820 kg
Longer overall length at 5,940 mm than the ZD220-3, needs a bit more room to maneuver
Zoomlion ZD220-3
Pros:
Conventional powershift transmission that most local mechanics already know
Shorter overall length at 5,546 mm, easier to maneuver in tight yards
No need for specialised hydrostatic driveline support
Blade capacity of 6.4 m³ nearly matches the DH24C3's 6.5 m³
Cons:
Less powerful at 217 HP against the DH24C3's 265 HP
Higher ground bearing pressure at 71 kPa, sinks more on soft ground than the DH24C3
No ripper option, so it cannot break up hard ground on its own
Wider overall width at 3,725 mm than the DH24C3
Pros:
Cons:
Closing Recommendation
The Shantui DH24C3 is the steadier choice where the job needs more raw power and a ripper option in reserve, and you are ready to support its newer hydrostatic drive. The Zoomlion ZD220-3 suits sites where a familiar, conventional driveline and a shorter body for tight spaces matter more than the extra output. So match the machine to your work: Shantui DH24C3 for higher power and a ripper option, Zoomlion ZD220-3 for familiar controls in tighter spaces.
Zoomlion ZD220-3 Vs Shantui DH24C3 Dozer Price, Technical Specifications & Features
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
The Shantui DH24C3 is a 23.8-tonne construction crawler dozer powered by a 265 HP engine. Its 6.5 m³ blade provides substantial material-moving capacity, while the 368 kN drawbar pull gives strong pushing force for larger earthwork. An optional ripper adds capability when harder patches appear. Ground bearing pressure is 68.3 kPa, and ground clearance reaches 540 mm. Rated gradeability of 30 degrees supports sloped-site applications. The DH24C3 is the largest of Shantui's DH-series construction dozers listed here. Large-plot development and highway earthwork are suitable applications where blade volume affects daily output. A 489-litre fuel tank supports a full working shift. The Shantui DH24C3 bulldozer price is ₹1 crore to ₹1.20 crore. Contractors can consider this dozer machine when smaller models cannot move enough material per pass. Its operating weight places it close to entry-level mining equipment, but its role remains construction earthwork. The optional ripper provides flexibility for changing soil conditions. Buyers working on highway projects can compare its blade capacity and drawbar pull with the DH17B3 before selecting the larger machine. The DH24C3 suits contractors who need higher output across large grading areas without moving fully into mining-class crawler dozers.
61 differ · 16 identical
Key highlights: Zoomlion ZD220-3 vs Shantui DH24C3 Dozer
Zoomlion ZD220-3
Shantui DH24C3
Engine Make
Weichai WD10G220E23
Weichai WP12G290E304
Rated Engine Power
162 kW (217 HP) @ 1850 rpm
198 kW (265 HP) @ 1900 rpm
Maximum Torque
NA
1457 Nm @ 1200-1500 rpm
Max Forward Speed
11.2 km/h
10 (0-10) km/h
Max Drawbar Pull
178 kN
368 kN
Fuel Tank
NA
489 L
Overall Width
3725 mm
3642 mm
Track Shoe Width
560 mm
560 mm
Ground Bearing Pressure
71 kPa
68.3 kPa
Blade Options
Straight tilt (std)
Coal blade 7.5 m3 also available
Ripper
NA
Optional
AC Cabin
NA
NA
Warranty
12 months / 2000 hrs
12 Months
Key highlights: Zoomlion ZD220-3 vs Shantui DH24C3 Dozer
Zoomlion ZD220-3
Shantui DH24C3
Engine Make
Weichai WD10G220E23
Weichai WP12G290E304
Rated Engine Power
162 kW (217 HP) @ 1850 rpm
198 kW (265 HP) @ 1900 rpm
Maximum Torque
NA
1457 Nm @ 1200-1500 rpm
Max Forward Speed
11.2 km/h
10 (0-10) km/h
Max Drawbar Pull
178 kN
368 kN
Fuel Tank
NA
489 L
Overall Width
3725 mm
3642 mm
Track Shoe Width
560 mm
560 mm
Ground Bearing Pressure
71 kPa
68.3 kPa
Blade Options
Straight tilt (std)
Coal blade 7.5 m3 also available
Ripper
NA
Optional
AC Cabin
NA
NA
Warranty
12 months / 2000 hrs
12 Months
Full specifications: Zoomlion ZD220-3 vs Shantui DH24C3 Dozer
Engine
26817
26831
Model
Weichai WD10G220E23
Weichai WP12G290E304
Fuel
Diesel
Diesel
Type
4-stroke, water-cooled, turbocharged, direct injection
Questions buyers ask about the Zoomlion ZD220-3 vs Shantui DH24C3
Ans.
The Shantui DH24C3 is more powerful. It runs a 265 HP engine against the ZD220-3's 217 HP, with a drawbar pull of 368 kN against 178 kN. Its blade is only slightly bigger, at 6.5 m³ against the ZD220-3's 6.4 m³.
Ans.
The Shantui DH24C3 sinks less. Its ground bearing pressure is 68.3 kPa against the ZD220-3's 71 kPa, even though it is a heavier machine. Neither is built for very soft or wet ground, so check with your dealer first.
Ans.
The Shantui DH24C3 offers an optional ripper for breaking up hard ground. The Zoomlion ZD220-3 has no ripper listed on this configuration, so it stays a pure grading and pushing machine.
Ans.
Yes. The DH24C3's blade holds 6.5 m³ against the ZD220-3's 6.4 m³, a very small gap. The bigger differences between these two dozers are in engine power, pulling force and the type of transmission, not blade size.
Ans.
The Shantui DH24C3 runs a hydrostatic drive for smooth, stepless speed control. The Zoomlion ZD220-3 uses a conventional powershift transmission, a design most local mechanics already know how to service.
Ans.
The Zoomlion ZD220-3 is shorter, at 5,546 mm against the DH24C3's 5,940 mm. That can help when working in tighter yards or loading areas, even though the DH24C3 is the narrower of the two machines.
Zoomlion ZD220-3 Vs Shantui DH24C3 - Compare Price & Availability Across 600+ Locations in India
Compare Zoomlion ZD220-3 Vs Shantui DH24C3 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
