Zoomlion ZD220-3 vs CASE 1650L: the two differ on 68 of 77 listed specs. The main differences are Engine (Weichai 217 HP vs FPT 146 HP), Price (₹1.20 – 1.40 Cr vs ₹90 Lakh – 1.10 Cr), Operating Weight (23,400 kg vs 17,960 kg), Weight (23400 kg vs 17960 kg). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Zoomlion ZD220-3
CASE 1650L
Zoomlion ZD220-3
VS
CASE 1650L
Dozer
Zoomlion ZD220-3 vs CASE 1650L: the two differ on 68 of 77 listed specs. The main differences are Engine (Weichai 217 HP vs FPT 146 HP), Price (₹1.20 – 1.40 Cr vs ₹90 Lakh – 1.10 Cr), Operating Weight (23,400 kg vs 17,960 kg), Weight (23400 kg vs 17960 kg). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Zoomlion ZD220-3
₹1.20 – 1.40 Cr
CASE 1650L
₹90 Lakh – 1.10 Cr
Particulars
Zoomlion ZD220-3
CASE 1650L
CASE 1650L vs Zoomlion ZD220-3: Which Dozer Fits Your Project
The Zoomlion ZD220-3 is a much bigger machine than the CASE 1650L, with close to a third more operating weight, more engine power and a blade well over the 1650L's capacity, all through a conventional powershift transmission. Even so, the 1650L holds a higher rated drawbar pull, a lower ground bearing pressure, a standard AC cabin and an optional ripper, none of which the ZD220-3 spec sheet lists.
Choose the ZD220-3 for high-volume bulk pushing and reclamation work where blade size drives output. Choose the CASE 1650L when pulling force, ripper flexibility or a gentler footprint matter more than sheer size. Browse more construction dozers or the full dozer lineup.
CASE 1650L
Pros:
Higher rated drawbar pull despite being the smaller machine
Lower ground bearing pressure for soft or freshly worked ground
Standard AC cabin with an air-suspension seat
Optional ripper for occasional hard patches
Hydrostatic drive with stepless speed control
Cons:
Much smaller blade capacity than the ZD220-3
Lower rated engine power
Lighter machine, so less raw pushing bulk on large plots
Zoomlion ZD220-3
Pros:
Much bigger blade capacity for large-scale earthwork
Higher rated engine power
Higher operating weight adds stability on large, open sites
Backed by Zoomlion's wider equipment presence in India
Cons:
Lower rated drawbar pull than the CASE 1650L
No ripper option listed
AC cabin is optional, not standard
Higher ground bearing pressure than the CASE 1650L
Pros:
Cons:
Closing Recommendation
Size does not tell the whole story here. The Zoomlion ZD220-3 brings a much bigger blade and more engine power for bulk pushing, but the CASE 1650L holds a higher rated drawbar pull, a gentler footprint and ripper flexibility despite being the smaller machine. So match the machine to your work: CASE 1650L for sites needing strong pulling force or occasional ripping, Zoomlion ZD220-3 for high-volume bulk pushing and reclamation work.
Zoomlion ZD220-3 Vs CASE 1650L Dozer Price, Technical Specifications & Features
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
Agency review
Planning to buy the Zoomlion ZD220-3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the CASE 1650L Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 1650L vs Zoomlion ZD220-3: Which Dozer Fits Your Project
The Zoomlion ZD220-3 is a much bigger machine than the CASE 1650L, with close to a third more operating weight, more engine power and a blade well over the 1650L's capacity, all through a conventional powershift transmission. Even so, the 1650L holds a higher rated drawbar pull, a lower ground bearing pressure, a standard AC cabin and an optional ripper, none of which the ZD220-3 spec sheet lists.
Choose the ZD220-3 for high-volume bulk pushing and reclamation work where blade size drives output. Choose the CASE 1650L when pulling force, ripper flexibility or a gentler footprint matter more than sheer size. Browse more construction dozers or the full dozer lineup.
CASE 1650L
Pros:
Higher rated drawbar pull despite being the smaller machine
Lower ground bearing pressure for soft or freshly worked ground
Standard AC cabin with an air-suspension seat
Optional ripper for occasional hard patches
Hydrostatic drive with stepless speed control
Cons:
Much smaller blade capacity than the ZD220-3
Lower rated engine power
Lighter machine, so less raw pushing bulk on large plots
Zoomlion ZD220-3
Pros:
Much bigger blade capacity for large-scale earthwork
Higher rated engine power
Higher operating weight adds stability on large, open sites
Backed by Zoomlion's wider equipment presence in India
Cons:
Lower rated drawbar pull than the CASE 1650L
No ripper option listed
AC cabin is optional, not standard
Higher ground bearing pressure than the CASE 1650L
Pros:
Cons:
Closing Recommendation
Size does not tell the whole story here. The Zoomlion ZD220-3 brings a much bigger blade and more engine power for bulk pushing, but the CASE 1650L holds a higher rated drawbar pull, a gentler footprint and ripper flexibility despite being the smaller machine. So match the machine to your work: CASE 1650L for sites needing strong pulling force or occasional ripping, Zoomlion ZD220-3 for high-volume bulk pushing and reclamation work.
Zoomlion ZD220-3 Vs CASE 1650L Dozer Price, Technical Specifications & Features
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
68 differ · 9 identical
Key highlights: Zoomlion ZD220-3 vs CASE 1650L Dozer
Zoomlion ZD220-3
CASE 1650L
Engine Make
Weichai WD10G220E23
FPT Industrial F4HE9684U
Rated Engine Power
162 kW (217 HP) @ 1850 rpm
107 kW (146 HP) @ 2200 rpm
Maximum Torque
NA
690 Nm @ 1400 rpm
Max Forward Speed
11.2 km/h
9.7 km/h
Max Drawbar Pull
178 kN
275 kN
Fuel Tank
NA
300 L
Overall Width
3725 mm
3200 mm
Track Shoe Width
560 mm
559 mm
Ground Bearing Pressure
71 kPa
46.1 kPa
Blade Options
Straight tilt (std)
PAT std
Ripper
NA
3-shank ripper optional (1600 kg); penetration 478 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Key highlights: Zoomlion ZD220-3 vs CASE 1650L Dozer
Zoomlion ZD220-3
CASE 1650L
Engine Make
Weichai WD10G220E23
FPT Industrial F4HE9684U
Rated Engine Power
162 kW (217 HP) @ 1850 rpm
107 kW (146 HP) @ 2200 rpm
Maximum Torque
NA
690 Nm @ 1400 rpm
Max Forward Speed
11.2 km/h
9.7 km/h
Max Drawbar Pull
178 kN
275 kN
Fuel Tank
NA
300 L
Overall Width
3725 mm
3200 mm
Track Shoe Width
560 mm
559 mm
Ground Bearing Pressure
71 kPa
46.1 kPa
Blade Options
Straight tilt (std)
PAT std
Ripper
NA
3-shank ripper optional (1600 kg); penetration 478 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Full specifications: Zoomlion ZD220-3 vs CASE 1650L Dozer
Engine
26817
26813
Model
Weichai WD10G220E23
FPT Industrial F4HE9684U
Fuel
Diesel
Diesel
Type
4-stroke, water-cooled, turbocharged, direct injection
Questions buyers ask about the Zoomlion ZD220-3 vs CASE 1650L
Ans.
It carries close to a third more operating weight, more engine power and a much bigger blade, putting it in a heavier working class.
Ans.
The CASE 1650L does, despite being the smaller and lighter machine. This gives it more pulling force through compacted ground than its size suggests.
Ans.
No, the spec sheet does not list one. The CASE 1650L offers an optional 3-shank ripper for occasional hard ground.
Ans.
The CASE 1650L is. Its ground bearing pressure is lower than the ZD220-3's, so it spreads its weight better on loose or freshly worked fill.
Ans.
Not as standard; the spec sheet lists it as optional. The CASE 1650L comes with a standard AC cabin and an air-suspension seat.
Ans.
The Zoomlion ZD220-3 does. Its much bigger blade and higher operating weight cut down the number of passes needed on large, open sites.
Zoomlion ZD220-3 Vs CASE 1650L - Compare Price & Availability Across 600+ Locations in India
Compare Zoomlion ZD220-3 Vs CASE 1650L price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
