LiuGong B230 vs CASE 2050M: the two differ on 68 of 77 listed specs. The main differences are Engine (Cummins 230 HP vs FPT 218 HP), Operating Weight (24,540 kg vs 20,592 kg), Weight (24540 kg vs 20592 kg), Fuel Tank (480 L vs 405 L). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
LiuGong B230
CASE 2050M
LiuGong B230
VS
CASE 2050M
Dozer
LiuGong B230 vs CASE 2050M: the two differ on 68 of 77 listed specs. The main differences are Engine (Cummins 230 HP vs FPT 218 HP), Operating Weight (24,540 kg vs 20,592 kg), Weight (24540 kg vs 20592 kg), Fuel Tank (480 L vs 405 L). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
LiuGong B230
₹1.10 – 1.30 Cr
CASE 2050M
₹1.10 – 1.30 Cr
Particulars
LiuGong B230
CASE 2050M
CASE 2050M vs LiuGong B230: which construction dozer moves more material?
The LiuGong B230 is the bigger machine on paper, at 230 HP against the CASE 2050M's 218 HP, 24,540 kg against 20,592 kg, and a 7.8 m³ blade against 5.6 m³. It also carries more fuel, at 480 litres against 405 litres. The 2050M answers back with more torque, at 1,082 Nm against 1,050 Nm, wider 610 mm track shoes against the B230's 560 mm, and a lower ground bearing pressure, so it sinks less on soft or wet ground.
Pick by the job in front of you. For the largest cuts and highest blade volume in one pass, the LiuGong B230's size and fuel capacity carry it through long shifts. For sites with softer ground or where steady pushing power matters more than raw blade size, the CASE 2050M's torque and lower ground pressure make it the steadier machine. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
More torque at 1,082 Nm against the B230's 1,050 Nm
Wider track shoes at 610 mm against the B230's 560 mm
Much lower ground bearing pressure at 50.0 kPa, so it sinks far less on soft ground than the B230's 83.1 kPa
Hydrostatic drive keeps full power through tight turns without gear changes
Cons:
Less powerful at 218 HP against the LiuGong B230's 230 HP
Smaller blade at 5.6 m³ against the B230's 7.8 m³, so it moves less material per pass
Lighter at 20,592 kg against the B230's 24,540 kg
Smaller fuel tank at 405 L against the B230's 480 L
LiuGong B230
Pros:
More powerful at 230 HP against the CASE 2050M's 218 HP
Bigger blade at 7.8 m³ against the 2050M's 5.6 m³, so it moves more material per pass
Heavier at 24,540 kg, which adds pushing stability against the 2050M's 20,592 kg
Bigger fuel tank at 480 L against the 2050M's 405 L
Cons:
Less torque at 1,050 Nm against the CASE 2050M's 1,082 Nm
Narrower track shoes at 560 mm against the 2050M's 610 mm
Sinks much more on soft ground, with ground bearing pressure at 83.1 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
Both machines are capable, but they lean different ways. The LiuGong B230 is the bigger, more powerful machine with a bigger blade and more fuel for long shifts, so it suits the largest cuts. The CASE 2050M carries more torque and sinks far less on soft ground, so it holds up better where the site is wet or loose. So match the machine to your work: LiuGong B230 for the biggest cuts and long shifts, CASE 2050M for soft or wet ground and steady pushing power.
LiuGong B230 Vs CASE 2050M Dozer Price, Technical Specifications & Features
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
Agency review
Planning to buy the LiuGong B230 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the CASE 2050M Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 2050M vs LiuGong B230: which construction dozer moves more material?
The LiuGong B230 is the bigger machine on paper, at 230 HP against the CASE 2050M's 218 HP, 24,540 kg against 20,592 kg, and a 7.8 m³ blade against 5.6 m³. It also carries more fuel, at 480 litres against 405 litres. The 2050M answers back with more torque, at 1,082 Nm against 1,050 Nm, wider 610 mm track shoes against the B230's 560 mm, and a lower ground bearing pressure, so it sinks less on soft or wet ground.
Pick by the job in front of you. For the largest cuts and highest blade volume in one pass, the LiuGong B230's size and fuel capacity carry it through long shifts. For sites with softer ground or where steady pushing power matters more than raw blade size, the CASE 2050M's torque and lower ground pressure make it the steadier machine. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
More torque at 1,082 Nm against the B230's 1,050 Nm
Wider track shoes at 610 mm against the B230's 560 mm
Much lower ground bearing pressure at 50.0 kPa, so it sinks far less on soft ground than the B230's 83.1 kPa
Hydrostatic drive keeps full power through tight turns without gear changes
Cons:
Less powerful at 218 HP against the LiuGong B230's 230 HP
Smaller blade at 5.6 m³ against the B230's 7.8 m³, so it moves less material per pass
Lighter at 20,592 kg against the B230's 24,540 kg
Smaller fuel tank at 405 L against the B230's 480 L
LiuGong B230
Pros:
More powerful at 230 HP against the CASE 2050M's 218 HP
Bigger blade at 7.8 m³ against the 2050M's 5.6 m³, so it moves more material per pass
Heavier at 24,540 kg, which adds pushing stability against the 2050M's 20,592 kg
Bigger fuel tank at 480 L against the 2050M's 405 L
Cons:
Less torque at 1,050 Nm against the CASE 2050M's 1,082 Nm
Narrower track shoes at 560 mm against the 2050M's 610 mm
Sinks much more on soft ground, with ground bearing pressure at 83.1 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
Both machines are capable, but they lean different ways. The LiuGong B230 is the bigger, more powerful machine with a bigger blade and more fuel for long shifts, so it suits the largest cuts. The CASE 2050M carries more torque and sinks far less on soft ground, so it holds up better where the site is wet or loose. So match the machine to your work: LiuGong B230 for the biggest cuts and long shifts, CASE 2050M for soft or wet ground and steady pushing power.
LiuGong B230 Vs CASE 2050M Dozer Price, Technical Specifications & Features
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
68 differ · 9 identical
Key highlights: LiuGong B230 vs CASE 2050M Dozer
LiuGong B230
CASE 2050M
Engine Make
Chongqing Cummins NT855C280S20
FPT Industria F4HE96848
Rated Engine Power
172 kW (230 HP) @ 2000 rpm
160 kW (218 HP) @ 2200 rpm
Maximum Torque
1050 Nm @ 1400 rpm
1082 Nm @ 1500 rpm
Max Forward Speed
11.82 km/h
9.3 (0-9.3) km/h
Max Drawbar Pull
NA
360 kN
Fuel Tank
480 L
405 L
Overall Width
3725 mm
3426 mm
Track Shoe Width
560 mm
610 mm
Ground Bearing Pressure
83.1 kPa
50.0 kPa (operating, 610 mm shoes)
Blade Options
Straight (referenced)
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Ripper
NA
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 Months
Key highlights: LiuGong B230 vs CASE 2050M Dozer
LiuGong B230
CASE 2050M
Engine Make
Chongqing Cummins NT855C280S20
FPT Industria F4HE96848
Rated Engine Power
172 kW (230 HP) @ 2000 rpm
160 kW (218 HP) @ 2200 rpm
Maximum Torque
1050 Nm @ 1400 rpm
1082 Nm @ 1500 rpm
Max Forward Speed
11.82 km/h
9.3 (0-9.3) km/h
Max Drawbar Pull
NA
360 kN
Fuel Tank
480 L
405 L
Overall Width
3725 mm
3426 mm
Track Shoe Width
560 mm
610 mm
Ground Bearing Pressure
83.1 kPa
50.0 kPa (operating, 610 mm shoes)
Blade Options
Straight (referenced)
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Ripper
NA
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 Months
Full specifications: LiuGong B230 vs CASE 2050M Dozer
Engine
26815
26827
Model
Chongqing Cummins NT855C280S20
FPT Industria F4HE96848 (NEF family)l
Fuel
Diesel
Diesel
Type
Turbocharged, air-to-air aftercooled
Direct common rail; turbocharged, air-to-air intercooled
Questions buyers ask about the LiuGong B230 vs CASE 2050M
Ans.
The LiuGong B230 is more powerful. It has 230 HP against the 2050M's 218 HP. The CASE 2050M answers back with more torque, at 1,082 Nm against the B230's 1,050 Nm.
Ans.
The LiuGong B230 has the bigger blade, at 7.8 m³ against the CASE 2050M's 5.6 m³. So the B230 carries more material in each pass.
Ans.
The LiuGong B230 is heavier, at 24,540 kg against the CASE 2050M's 20,592 kg. Its bigger frame and blade add to that weight.
Ans.
The CASE 2050M is easier on soft ground. Its ground bearing pressure is 50.0 kPa against the LiuGong B230's 83.1 kPa, so the 2050M spreads its weight over more track area and sinks less.
Ans.
The LiuGong B230 has the bigger fuel tank, at 480 litres against the CASE 2050M's 405 litres. That gives the B230 more room to run through a long shift without stopping to refuel.
LiuGong B230 Vs CASE 2050M - Compare Price & Availability Across 600+ Locations in India
Compare LiuGong B230 Vs CASE 2050M price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
