Shantui DH46C3 vs Komatsu D475A-5E0: the two differ on 70 of 77 listed specs. The main differences are Engine (Cummins 474 HP vs Komatsu 890 HP), Operating Weight (56,200 kg vs 108,390 kg), Weight (56200 kg vs 108390 kg), Fuel Tank (880 L vs 1670 L). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH46C3
Komatsu D475A-5E0
Shantui DH46C3
VS
Komatsu D475A-5E0
Dozer
Shantui DH46C3 vs Komatsu D475A-5E0: the two differ on 70 of 77 listed specs. The main differences are Engine (Cummins 474 HP vs Komatsu 890 HP), Operating Weight (56,200 kg vs 108,390 kg), Weight (56200 kg vs 108390 kg), Fuel Tank (880 L vs 1670 L). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH46C3
Price Available Soon
Komatsu D475A-5E0
Price Available Soon
Particulars
Shantui DH46C3
Komatsu D475A-5E0
Komatsu D475A-5E0 vs Shantui DH46C3: which mining dozer fits your pit?
The Komatsu D475A-5E0 is in a different class altogether, at 890 HP against the Shantui DH46C3's 474 HP, with a 27.2 m³ blade against 13.7 m³. It is also almost twice the weight, at 108,390 kg against 56,200 kg, and it still turns tighter, at 4,600 mm against 4,900 mm. This is Komatsu's largest listed mining dozer, built to run alongside mining shovels as a primary production tool, not just support equipment. The Shantui DH46C3 is the most advanced dozer Shantui sells, running a Cummins X15 engine and an electronically controlled hydrostatic drive with intelligent load matching. It is a serious mid-size mining machine, but its long-duty-cycle record against established mining-class competitors is still being built.
Choose by the scale of your mine. For the biggest opencast pits where the dozer works as a primary production tool alongside shovels, and where Komatsu's mining support structure is already in place, the D475A-5E0 is the machine built for that job. For mining and coal operations that want modern electronic power in a lighter, more affordable package, and are ready to back newer engineering, the DH46C3 is the steadier step up from construction-class equipment. Both are mining dozers in our dozer range. New to dozers? Read the bulldozer guide first.
Komatsu D475A-5E0
Pros:
Far more powerful at 890 HP against 474 HP, with a much bigger 27.2 m³ blade against 13.7 m³
Almost twice the operating weight, at 108,390 kg against 56,200 kg, giving it more pushing force
Turns tighter despite being the bigger machine, at 4,600 mm against 4,900 mm
AC cabin comes standard, not optional
Two ripper choices: a giant single-shank or a heavier 3-shank multi-shank
Bigger fuel tank at 1,670 litres for longer shifts
Cons:
Fully dependent on the Komatsu dealer network for its electronic engine, transmission and diagnostics
No drawbar pull figure listed on this comparison, so pulling force is harder to compare on paper
Slightly less ground clearance than the DH46C3, at 655 mm against 680 mm
Its scale means bigger transport and site infrastructure needs
Shantui DH46C3
Pros:
Cummins X15 engine is serviced and rebuilt worldwide, so parts are not locked to one brand
Hydrostatic drive with intelligent load matching keeps the engine efficient across changing loads
Rated drawbar pull of 720 kN is published for direct comparison
Slightly more ground clearance at 680 mm against 655 mm
Lighter and smaller, easier to move between sites
Rock-type semi-U blade built for hard ground from the start
Cons:
Far less powerful at 474 HP, with a much smaller 13.7 m³ blade
Wider turning radius at 4,900 mm against 4,600 mm, despite being the smaller machine
No AC cabin listed
Newer to mining fleets, so its long-duty-cycle record is still being built against established ultra-class machines
Pros:
Cons:
Closing Recommendation
The Komatsu D475A-5E0 is built for the biggest opencast mines, where the dozer works as a primary production tool beside shovels and Komatsu's mining support structure is already in place. The Shantui DH46C3 gives mining and coal operations a lighter, more affordable step into modern electronic dozing, for those ready to back newer engineering over a proven mining giant. So match the machine to your work: Komatsu D475A-5E0 for ultra-class opencast mining production, Shantui DH46C3 for mining and coal operations wanting a lighter, modern step up from construction-class equipment.
Shantui DH46C3 Vs Komatsu D475A-5E0 Dozer Price, Technical Specifications & Features
The Shantui DH46C3 is a 56.2-tonne mining crawler dozer with a 474 HP engine. Its 13.7 m³ blade handles substantial material movement, while the 720 kN drawbar pull provides strong force through dense material. A single-shank ripper reaches 1,245 mm with a 1,056 mm lift. The 37.5-degree angle adjustment gives additional control during hard-ground breaking. Ground bearing pressure ranges from 112 to 130 kPa depending on track shoe width. That allows the machine to be matched more closely to pit conditions. An 880-litre fuel tank supports long shifts, and 680 mm of ground clearance suits rough mining surfaces. The DH46C3 is built for coal and metal mining where pushing and ripping can form part of the same work cycle. A coal contractor working haul roads and stockyards can consider this dozer machine when construction-class equipment is no longer enough. Its blade capacity provides substantial output per pass, while the deep ripper supports harder ground. Buyers can consider the track width and ripping requirement together before selecting the machine. The DH46C3 provides a larger Shantui mining option for operations requiring both strong pushing capability and deeper breaking.
The Komatsu D475A-5E0 is a 108.4-tonne mining crawler dozer with an 890 HP engine. Its 27.2 m³ blade handles very large material volumes, while tractor-only ground bearing pressure is 128 kPa and reaches about 166 kPa in full operating trim. Two ripper configurations are available for different breaking requirements. The variable giant single-shank reaches 1,744 mm, while the 3-shank multi-shank setup covers wider ground. The choice therefore depends on whether the operation needs deeper breaking or broader coverage. A 1,670-litre fuel tank supports extended working shifts, and 655 mm of ground clearance suits rough mining surfaces. The machine is the largest of Komatsu's listed mining dozers. Coal and metal mining are its primary applications rather than general construction. Large mining operations can consider this dozer machine when production requirements have moved beyond the D375A-6. Its blade capacity can reduce the number of passes required across large cuts. Buyers can select the ripper arrangement according to the expected ground conditions. The operating weight and power make it suitable for very large-scale pushing and ripping work. For mining fleets requiring Komatsu's highest listed crawler dozer capacity, the D475A-5E0 provides the largest option.
Agency review
Planning to buy the Shantui DH46C3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Komatsu D475A-5E0 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Komatsu D475A-5E0 vs Shantui DH46C3: which mining dozer fits your pit?
The Komatsu D475A-5E0 is in a different class altogether, at 890 HP against the Shantui DH46C3's 474 HP, with a 27.2 m³ blade against 13.7 m³. It is also almost twice the weight, at 108,390 kg against 56,200 kg, and it still turns tighter, at 4,600 mm against 4,900 mm. This is Komatsu's largest listed mining dozer, built to run alongside mining shovels as a primary production tool, not just support equipment. The Shantui DH46C3 is the most advanced dozer Shantui sells, running a Cummins X15 engine and an electronically controlled hydrostatic drive with intelligent load matching. It is a serious mid-size mining machine, but its long-duty-cycle record against established mining-class competitors is still being built.
Choose by the scale of your mine. For the biggest opencast pits where the dozer works as a primary production tool alongside shovels, and where Komatsu's mining support structure is already in place, the D475A-5E0 is the machine built for that job. For mining and coal operations that want modern electronic power in a lighter, more affordable package, and are ready to back newer engineering, the DH46C3 is the steadier step up from construction-class equipment. Both are mining dozers in our dozer range. New to dozers? Read the bulldozer guide first.
Komatsu D475A-5E0
Pros:
Far more powerful at 890 HP against 474 HP, with a much bigger 27.2 m³ blade against 13.7 m³
Almost twice the operating weight, at 108,390 kg against 56,200 kg, giving it more pushing force
Turns tighter despite being the bigger machine, at 4,600 mm against 4,900 mm
AC cabin comes standard, not optional
Two ripper choices: a giant single-shank or a heavier 3-shank multi-shank
Bigger fuel tank at 1,670 litres for longer shifts
Cons:
Fully dependent on the Komatsu dealer network for its electronic engine, transmission and diagnostics
No drawbar pull figure listed on this comparison, so pulling force is harder to compare on paper
Slightly less ground clearance than the DH46C3, at 655 mm against 680 mm
Its scale means bigger transport and site infrastructure needs
Shantui DH46C3
Pros:
Cummins X15 engine is serviced and rebuilt worldwide, so parts are not locked to one brand
Hydrostatic drive with intelligent load matching keeps the engine efficient across changing loads
Rated drawbar pull of 720 kN is published for direct comparison
Slightly more ground clearance at 680 mm against 655 mm
Lighter and smaller, easier to move between sites
Rock-type semi-U blade built for hard ground from the start
Cons:
Far less powerful at 474 HP, with a much smaller 13.7 m³ blade
Wider turning radius at 4,900 mm against 4,600 mm, despite being the smaller machine
No AC cabin listed
Newer to mining fleets, so its long-duty-cycle record is still being built against established ultra-class machines
Pros:
Cons:
Closing Recommendation
The Komatsu D475A-5E0 is built for the biggest opencast mines, where the dozer works as a primary production tool beside shovels and Komatsu's mining support structure is already in place. The Shantui DH46C3 gives mining and coal operations a lighter, more affordable step into modern electronic dozing, for those ready to back newer engineering over a proven mining giant. So match the machine to your work: Komatsu D475A-5E0 for ultra-class opencast mining production, Shantui DH46C3 for mining and coal operations wanting a lighter, modern step up from construction-class equipment.
Shantui DH46C3 Vs Komatsu D475A-5E0 Dozer Price, Technical Specifications & Features
The Shantui DH46C3 is a 56.2-tonne mining crawler dozer with a 474 HP engine. Its 13.7 m³ blade handles substantial material movement, while the 720 kN drawbar pull provides strong force through dense material. A single-shank ripper reaches 1,245 mm with a 1,056 mm lift. The 37.5-degree angle adjustment gives additional control during hard-ground breaking. Ground bearing pressure ranges from 112 to 130 kPa depending on track shoe width. That allows the machine to be matched more closely to pit conditions. An 880-litre fuel tank supports long shifts, and 680 mm of ground clearance suits rough mining surfaces. The DH46C3 is built for coal and metal mining where pushing and ripping can form part of the same work cycle. A coal contractor working haul roads and stockyards can consider this dozer machine when construction-class equipment is no longer enough. Its blade capacity provides substantial output per pass, while the deep ripper supports harder ground. Buyers can consider the track width and ripping requirement together before selecting the machine. The DH46C3 provides a larger Shantui mining option for operations requiring both strong pushing capability and deeper breaking.
The Komatsu D475A-5E0 is a 108.4-tonne mining crawler dozer with an 890 HP engine. Its 27.2 m³ blade handles very large material volumes, while tractor-only ground bearing pressure is 128 kPa and reaches about 166 kPa in full operating trim. Two ripper configurations are available for different breaking requirements. The variable giant single-shank reaches 1,744 mm, while the 3-shank multi-shank setup covers wider ground. The choice therefore depends on whether the operation needs deeper breaking or broader coverage. A 1,670-litre fuel tank supports extended working shifts, and 655 mm of ground clearance suits rough mining surfaces. The machine is the largest of Komatsu's listed mining dozers. Coal and metal mining are its primary applications rather than general construction. Large mining operations can consider this dozer machine when production requirements have moved beyond the D375A-6. Its blade capacity can reduce the number of passes required across large cuts. Buyers can select the ripper arrangement according to the expected ground conditions. The operating weight and power make it suitable for very large-scale pushing and ripping work. For mining fleets requiring Komatsu's highest listed crawler dozer capacity, the D475A-5E0 provides the largest option.
70 differ · 7 identical
Key highlights: Shantui DH46C3 vs Komatsu D475A-5E0 Dozer
Shantui DH46C3
Komatsu D475A-5E0
Engine Make
Cummins X15
Komatsu SAA12V140E-3
Rated Engine Power
354 kW (474 HP) @ 1800 rpm
664 kW (890 HP) @ 2000 rpm
Maximum Torque
2373 Nm @ 1400 rpm
NA
Max Forward Speed
11 (0-11) km/h
11.2 km/h
Max Drawbar Pull
720 kN
NA
Fuel Tank
880 L
1670 L
Overall Width
4320 mm
5265 mm
Track Shoe Width
610 mm / 660 mm / 710 mm
710 mm (extreme service; 810 mm / 910 mm optional)
Questions buyers ask about the Shantui DH46C3 vs Komatsu D475A-5E0
Ans.
The Komatsu D475A-5E0 is far more powerful. It has 890 HP against the DH46C3's 474 HP, and its 27.2 m³ blade holds about twice as much material as the DH46C3's 13.7 m³ blade. It is also close to double the operating weight, at 108,390 kg against 56,200 kg.
Ans.
The Komatsu D475A-5E0 turns tighter. Its minimum turning radius is 4,600 mm against 4,900 mm on the DH46C3, even though it is by far the larger and heavier dozer.
Ans.
The Shantui DH46C3 lists a rated drawbar pull of 720 kN. The Komatsu D475A-5E0 does not publish a drawbar pull figure on this comparison, so its far greater weight and power are the better way to judge its pulling force through heavy material.
Ans.
The Komatsu D475A-5E0 fits an existing Komatsu fleet better. It runs on the same dealer network for its electronic engine, transmission and diagnostics, and it is built for mining operations already set up around Komatsu's mining-scale support structure.
Ans.
The Shantui DH46C3 has an edge here. Its Cummins X15 engine is a globally supported diesel with no proprietary lock-in, so servicing does not depend on one import channel. The D475A-5E0's electronic engine and transmission route through Komatsu's dealer network.
Ans.
The Shantui DH46C3 has slightly more ground clearance, at 680 mm against 655 mm on the D475A-5E0. The difference is small and unlikely to be the deciding factor between these two machines.
Shantui DH46C3 Vs Komatsu D475A-5E0 - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH46C3 Vs Komatsu D475A-5E0 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
