ACE FX 250 vs ACE NXP 150: the two differ on 34 of 53 listed specs. The main differences are Engine (Ashok Leyland 133 HP vs Tata 49 HP), Operating Weight (20200 kg vs 15310 kg), Ex-Factory Price (GST incl.) (₹ 50 - 52 Lakh vs ₹ 41 - 43 Lakh), Lift Capacity (25 Tonnes vs 15 Tonnes). The other 19 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE FX 250
ACE NXP 150
ACE FX 250
VS
ACE NXP 150
Crane
ACE FX 250 vs ACE NXP 150: the two differ on 34 of 53 listed specs. The main differences are Engine (Ashok Leyland 133 HP vs Tata 49 HP), Operating Weight (20200 kg vs 15310 kg), Ex-Factory Price (GST incl.) (₹ 50 - 52 Lakh vs ₹ 41 - 43 Lakh), Lift Capacity (25 Tonnes vs 15 Tonnes). The other 19 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE FX 250
₹ 50 - 52 Lakh
ACE NXP 150
₹ 41 - 43 Lakh
Particulars
ACE FX 250
ACE NXP 150
ACE FX 250 vs ACE NXP 150: Two ACE Hydra Cranes, Different Jobs
The ACE FX 250 and the ACE NXP 150 come from the same maker, so this choice is about the job, not the brand. The FX 250 lifts more weight and runs a bigger engine, which helps on flat, open sites with heavy loads. The NXP 150 lifts less but climbs higher and drives on all four wheels, so it can reach places the FX 250 cannot.
If most of your work is heavy lifting on level ground, the FX 250's higher capacity and wider base give steady support. If your sites have rough patches or you need extra height, the NXP 150's four-wheel drive and taller boom are the better fit. See the full ACE crane range, read the crane buying guide, or browse all cranes on DesiMachines before you decide.
ACE FX 250 Hydra Crane
Pros:
Higher max lifting capacity of 25 tonnes
More powerful engine with 133 HP
Larger wheelbase enhancing lifting stability
Cons:
Lower max boom height compared to ACE NXP 150
2 Wheel drive as opposed to the 4 Wheel drive in ACE NXP 150
Heavier operating weight could limit mobility on certain sites
ACE NXP 150 Hydra Crane
Pros:
4 Wheel Drive for better terrain navigation
Higher max boom height of 21.0 m provides greater reach
Lighter operating weight for increased ease of transport
Cons:
Lower 15 tonnes max lifting capacity
Less engine power with 49 HP
Smaller wheelbase may affect stability during lifting operations
Pros:
Cons:
Closing Recommendation
Both cranes come from ACE, so pick based on what your site needs, not the badge. The FX 250 suits heavy lifting jobs on flat, open ground where a stronger engine and steady base matter most. The NXP 150 suits sites with rough patches or tight corners, where four-wheel drive and extra reach make the work easier. So match the machine to your work: ACE FX 250 for heavy lifting on level ground, ACE NXP 150 for rough terrain and taller reach.
ACE FX 250 Vs ACE NXP 150 Crane Price, Technical Specifications & Features
The ACE FX 250 is a 25-ton high-capacity farana crane built for heavy industrial, port, and large-scale infrastructure lifting in India. It is powered by an Ashok Leyland diesel engine that generates 133 HP, delivering consistent hydraulic power for demanding multi-shift operations. With a rated capacity of 25 tonnes and an extended boom of 18.3 metres, it has a wide operating range. Advanced load monitoring and overload protection ensure safety at maximum loads. High hydraulic efficiency lowers fuel consumption per tonne-metre of lift. The ACE FX 250 crane price in India is approximately ₹50 lakh to ₹52 lakh, depending on variant selection and location. This crane from ACE Construction Equipment is a high-performance option for large EPC companies, ports, and professional crane rental fleets.
Pick and carry cranes do most of the everyday lifting on Indian sites, and the ACE NXP 150 covers that duty with a 15 Tonnes maximum lifting capacity and a four-section boom reaching 21.0 m of boom height. A Tata engine rated 49 HP drives it, with 4 Wheel Drive underneath and a 32 km/h travel speed without load for quick shifts between bays.
Erection jobs, plant maintenance, godown and yard loading all fall within its range. ACE builds these cranes in India, so parts and service stay close at hand, and the Tata engine can be attended by practically any truck mechanic.
ACE FX 250 vs ACE NXP 150: Two ACE Hydra Cranes, Different Jobs
The ACE FX 250 and the ACE NXP 150 come from the same maker, so this choice is about the job, not the brand. The FX 250 lifts more weight and runs a bigger engine, which helps on flat, open sites with heavy loads. The NXP 150 lifts less but climbs higher and drives on all four wheels, so it can reach places the FX 250 cannot.
If most of your work is heavy lifting on level ground, the FX 250's higher capacity and wider base give steady support. If your sites have rough patches or you need extra height, the NXP 150's four-wheel drive and taller boom are the better fit. See the full ACE crane range, read the crane buying guide, or browse all cranes on DesiMachines before you decide.
ACE FX 250 Hydra Crane
Pros:
Higher max lifting capacity of 25 tonnes
More powerful engine with 133 HP
Larger wheelbase enhancing lifting stability
Cons:
Lower max boom height compared to ACE NXP 150
2 Wheel drive as opposed to the 4 Wheel drive in ACE NXP 150
Heavier operating weight could limit mobility on certain sites
ACE NXP 150 Hydra Crane
Pros:
4 Wheel Drive for better terrain navigation
Higher max boom height of 21.0 m provides greater reach
Lighter operating weight for increased ease of transport
Cons:
Lower 15 tonnes max lifting capacity
Less engine power with 49 HP
Smaller wheelbase may affect stability during lifting operations
Pros:
Cons:
Closing Recommendation
Both cranes come from ACE, so pick based on what your site needs, not the badge. The FX 250 suits heavy lifting jobs on flat, open ground where a stronger engine and steady base matter most. The NXP 150 suits sites with rough patches or tight corners, where four-wheel drive and extra reach make the work easier. So match the machine to your work: ACE FX 250 for heavy lifting on level ground, ACE NXP 150 for rough terrain and taller reach.
ACE FX 250 Vs ACE NXP 150 Crane Price, Technical Specifications & Features
The ACE FX 250 is a 25-ton high-capacity farana crane built for heavy industrial, port, and large-scale infrastructure lifting in India. It is powered by an Ashok Leyland diesel engine that generates 133 HP, delivering consistent hydraulic power for demanding multi-shift operations. With a rated capacity of 25 tonnes and an extended boom of 18.3 metres, it has a wide operating range. Advanced load monitoring and overload protection ensure safety at maximum loads. High hydraulic efficiency lowers fuel consumption per tonne-metre of lift. The ACE FX 250 crane price in India is approximately ₹50 lakh to ₹52 lakh, depending on variant selection and location. This crane from ACE Construction Equipment is a high-performance option for large EPC companies, ports, and professional crane rental fleets.
Pick and carry cranes do most of the everyday lifting on Indian sites, and the ACE NXP 150 covers that duty with a 15 Tonnes maximum lifting capacity and a four-section boom reaching 21.0 m of boom height. A Tata engine rated 49 HP drives it, with 4 Wheel Drive underneath and a 32 km/h travel speed without load for quick shifts between bays.
Erection jobs, plant maintenance, godown and yard loading all fall within its range. ACE builds these cranes in India, so parts and service stay close at hand, and the Tata engine can be attended by practically any truck mechanic.
34 differ · 19 identical
Key highlights: ACE FX 250 vs ACE NXP 150 Crane
ACE FX 250
ACE NXP 150
Engine Make
Ashok Leyland
Tata
Articulation
40°
40°
Max. Speed
35 km/h
32 km/h
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Overall Length
NA
NA
Overall Width
2600 mm
2950 mm
Wheelbase
5100 mm
4150 mm
Boom Luffing Range
-3° to +66°
-3° to +75°
Warranty
1 Year
1 Year
Key highlights: ACE FX 250 vs ACE NXP 150 Crane
ACE FX 250
ACE NXP 150
Engine Make
Ashok Leyland
Tata
Articulation
40°
40°
Max. Speed
35 km/h
32 km/h
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Overall Length
NA
NA
Overall Width
2600 mm
2950 mm
Wheelbase
5100 mm
4150 mm
Boom Luffing Range
-3° to +66°
-3° to +75°
Warranty
1 Year
1 Year
Full specifications: ACE FX 250 vs ACE NXP 150 Crane
Engine
ACE FX 250
ACE NXP 150
Engine Make
Ashok Leyland
Tata
Engine Type
6 cylinder water cooled diesel engine
4 cylinder water cooled diesel engine
Max Power
133 HP (99 kW) @ 2300 RPM
49 HP (36 kW) @ 2000 RPM
Battery
24 Negative Earth
12V; Negative earth; 75Ah
Alternator
NA
35A
Lifting Capacity
ACE FX 250
ACE NXP 150
Max. Lifting Capacity
25 Tonnes
15 Tonnes
Transmission & Clutch
ACE FX 250
ACE NXP 150
Drive
2 Wheel drive
4 Wheel Drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and high-low drive selector for creep speed
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Steering System
ACE FX 250
ACE NXP 150
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Full power orbitrol with twin hydraulic double acting cylinders
Articulation
40°
40°
Turning Radius
8200 mm
6500 mm
Hoist Mechanism
ACE FX 250
ACE NXP 150
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
4 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
Hoist Speed
50 Mtrs./Min (Line Speed)
50 Mtrs./Min (Line Speed)
Brakes
ACE FX 250
ACE NXP 150
Front Wheels
Fully pneumatic brakes on front wheels
Pneumatically assisted hydraulic brakes are provided on front wheels
Rear Wheels
Fully pneumatic brakes on rear wheels
Fully air actuated brakes on rear wheels.
Parking Brake
Parking brake is pneumatically operated fail safe type
Parking brake is pneumatically operated fail safe type
Service Capacity
ACE FX 250
ACE NXP 150
Engine Oil
NA
NA
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE FX 250
ACE NXP 150
Overall Length With Bucket
NA
NA
Overall Width
2600 mm
2950 mm
Overall Height
NA
NA
Wheel Base
5100 mm
4150 mm
Operating Weight
20200 kg
15310 kg
Front Track
1900 mm
1900 mm
Rear Track
1770 mm
1800 mm
Front Tyres
12.00 x 24-20 PR (4 Nos.)
11 x 20 (4 Nos.)
Rear Tyres
17.50 x 25-20 PR (2 Nos.)
14.00 x 25 (2 Nos.)
Boom
ACE FX 250
ACE NXP 150
Telescoping
Three-part slotted boom with hydraulically operated synchronized extensions of 12 metres height
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
Derricking
Through two double-acting extension cylinder
Double acting hydraulic cylinder with counter balance safety valve is provided for boom telescoping
Boom Luffing Time
NA
NA
Boom Luffing Range
-3° to +66°
-3° to +75°
Boom Height
18.3 m
21.0 m
Full specifications: ACE FX 250 vs ACE NXP 150 Crane
Engine
ACE FX 250
ACE NXP 150
Engine Make
Ashok Leyland
Tata
Engine Type
6 cylinder water cooled diesel engine
4 cylinder water cooled diesel engine
Max Power
133 HP (99 kW) @ 2300 RPM
49 HP (36 kW) @ 2000 RPM
Battery
24 Negative Earth
12V; Negative earth; 75Ah
Alternator
NA
35A
Lifting Capacity
ACE FX 250
ACE NXP 150
Max. Lifting Capacity
25 Tonnes
15 Tonnes
Transmission Clutch
ACE FX 250
ACE NXP 150
Drive
2 Wheel drive
4 Wheel Drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and high-low drive selector for creep speed
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Steering
ACE FX 250
ACE NXP 150
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Full power orbitrol with twin hydraulic double acting cylinders
Articulation
40°
40°
Turning Radius
8200 mm
6500 mm
Hoist Mechanism
ACE FX 250
ACE NXP 150
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
4 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
Hoist Speed
50 Mtrs./Min (Line Speed)
50 Mtrs./Min (Line Speed)
Brakes
ACE FX 250
ACE NXP 150
Front Wheels
Fully pneumatic brakes on front wheels
Pneumatically assisted hydraulic brakes are provided on front wheels
Rear Wheels
Fully pneumatic brakes on rear wheels
Fully air actuated brakes on rear wheels.
Parking Brake
Parking brake is pneumatically operated fail safe type
Parking brake is pneumatically operated fail safe type
Service Capacity
ACE FX 250
ACE NXP 150
Engine Oil
NA
NA
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE FX 250
ACE NXP 150
Overall Length With Bucket
NA
NA
Overall Width
2600 mm
2950 mm
Overall Height
NA
NA
Wheel Base
5100 mm
4150 mm
Operating Weight
20200 kg
15310 kg
Front Track
1900 mm
1900 mm
Rear Track
1770 mm
1800 mm
Front Tyres
12.00 x 24-20 PR (4 Nos.)
11 x 20 (4 Nos.)
Rear Tyres
17.50 x 25-20 PR (2 Nos.)
14.00 x 25 (2 Nos.)
Boom
ACE FX 250
ACE NXP 150
Telescoping
Three-part slotted boom with hydraulically operated synchronized extensions of 12 metres height
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
Derricking
Through two double-acting extension cylinder
Double acting hydraulic cylinder with counter balance safety valve is provided for boom telescoping
Questions buyers ask about the ACE FX 250 vs ACE NXP 150
Ans.
No, the NXP 150 lifts less weight than the FX 250. The FX 250 is built for heavier loads and steadier lifting, while the NXP 150 trades some lifting power for taller reach and better movement on rough or uneven ground around the site.
Ans.
The ACE NXP 150 works better on rough sites because it drives on all four wheels. This gives it more grip and control when the ground is loose, muddy, or sloped. The FX 250 uses two-wheel drive, so it does best on firm, level ground.
Ans.
No, the ACE FX 250 uses two-wheel drive. It makes up for this with a bigger engine and a wider wheelbase, which give it steady lifting power on flat sites. If you need four-wheel drive for rough terrain, the NXP 150 is the better pick.
Ans.
Yes, the NXP 150 is lighter than the FX 250, so it is easier to transport and move around a site. Its smaller size also helps in tighter spaces where the heavier FX 250 would need more room to work safely.
Ans.
The ACE NXP 150 needs less space because of its lighter build and smaller footprint. The FX 250 needs a wider working area to use its larger wheelbase safely, so it suits open yards and factory floors better than tight lanes.
ACE FX 250 Vs ACE NXP 150 - Compare Price & Availability Across 600+ Locations in India
Compare ACE FX 250 Vs ACE NXP 150 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
