SEM 818F vs SEM 822D: the two differ on 61 of 77 listed specs. The main differences are Engine (Weichai 188 HP vs Weichai 235 HP), Price (₹70 – 85 Lakh vs ₹90 Lakh – 1.10 Cr), Operating Weight (16,950 kg vs 24,000 kg), Weight (16950 kg vs 24000 kg). The other 16 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
SEM 818F
SEM 822D
SEM 818F
VS
SEM 822D
Dozer
SEM 818F vs SEM 822D: the two differ on 61 of 77 listed specs. The main differences are Engine (Weichai 188 HP vs Weichai 235 HP), Price (₹70 – 85 Lakh vs ₹90 Lakh – 1.10 Cr), Operating Weight (16,950 kg vs 24,000 kg), Weight (16950 kg vs 24000 kg). The other 16 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
SEM 818F
₹70 – 85 Lakh
SEM 822D
₹90 Lakh – 1.10 Cr
Particulars
SEM 818F
SEM 822D
SEM 818F vs SEM 822D: which size fits your site?
Both dozers come from SEM's construction range, so the real question here is size and job fit, not brand. The SEM 818F is the smaller machine at 16,950 kg, with a 4.3 m³ blade and a multi-shank ripper fitted as a standard, mandatory attachment. Its tighter turning radius and lower ground bearing pressure help on confined or unpredictable ground. The SEM 822D steps up to 24,000 kg, a 6.4 m³ blade and a published drawbar pull of 350 kN, with an optional ripper and a winch-ready setup instead of a mandatory one. Both run a hydrostatic drive, though the 822D's is built around a Rexroth pump for its third-generation electronic control.
Choose the 818F for land-clearing, road-base or confined sites where the ripper needs to be ready from day one and tight turns matter. Choose the 822D for larger-plot grading and stronger pushing duty, where the extra blade volume and drawbar pull pay off across a full working day. Both sit in our construction dozers range, part of the wider dozer lineup and listed on the dozer comparison hub. New to dozers? Read the bulldozer guide first.
SEM 818F
Pros:
Multi-shank ripper fitted as a standard, mandatory attachment, ready for hard or unknown ground
Tighter turning radius at 3,700 mm, suits confined sites
Lower ground bearing pressure at 57 kPa, sinks less on soft ground than the 822D
Lighter at 16,950 kg, easier to transport and manoeuvre
Hydrostatic transmission gives smooth, stepless speed control
Cons:
Smaller blade at 4.3 m³, moves less material per pass than the 822D
Less powerful at 188 HP against the 822D's 235 HP
No published drawbar pull figure to compare directly against the 822D
Smaller 410-litre fuel tank than the 822D
SEM 822D
Pros:
More powerful at 235 HP
Bigger blade at 6.4 m³, moves more material per pass
Rated drawbar pull of 350 kN is published in its specifications
Larger 460-litre fuel tank for longer shifts
Hydrostatic drive built around a Rexroth pump, with third-generation electronic control
Cons:
Ripper is optional rather than fitted standard like the 818F
Wider turning radius at 4,215 mm, needs more room to turn on confined sites
Higher ground bearing pressure at 71.2 kPa, sinks more on soft ground than the 818F
Heavier at 24,000 kg, harder to manoeuvre on tight sites
Pros:
Cons:
Closing Recommendation
The SEM 818F is the steadier choice for confined sites and land-clearing work, where the ripper needs to be ready from day one and tight turns matter more than raw size. The SEM 822D fits larger-plot grading and heavier pushing duty, where its bigger blade and drawbar pull pay off across a full working day. So match the machine to your work: SEM 818F for confined sites and land-clearing with unpredictable ground, SEM 822D for larger-plot grading and heavier pushing duty.
SEM 818F Vs SEM 822D Dozer Price, Technical Specifications & Features
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
The SEM 822D is a 24-tonne construction crawler dozer powered by a 235 HP engine. Its 6.4 m³ blade provides substantial material-moving capacity for large-plot grading and highway earthwork. A 350 kN drawbar pull gives strong pushing capability through compacted subgrade. Ripper choices include a multi-shank configuration reaching 860 mm and a single-shank option for different ground requirements. The machine is also winch-ready for towing and recovery applications. Ground bearing pressure is 71.2 kPa, while ground clearance reaches 400 mm. A 380-litre fuel tank supports a full working shift. The 822D sits close to the SEM 824F, so the ripper and towing requirements can help determine which machine suits the project. The SEM 822D bulldozer price is ₹90 lakh to ₹1.10 crore. Contractors preparing large industrial plots or road packages can consider this dozer machine where stronger pushing force and blade volume affect daily output. Its operating weight places it in the larger construction class without moving fully into mining equipment. The available ripper configurations provide flexibility when soil becomes harder. Buyers can compare the 822D against the 824F based on the required attachments and ground conditions. It provides a capable construction crawler dozer for regular bulk grading, road-base preparation and larger site-development work.
Agency review
Planning to buy the SEM 818F Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the SEM 822D Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
SEM 818F vs SEM 822D: which size fits your site?
Both dozers come from SEM's construction range, so the real question here is size and job fit, not brand. The SEM 818F is the smaller machine at 16,950 kg, with a 4.3 m³ blade and a multi-shank ripper fitted as a standard, mandatory attachment. Its tighter turning radius and lower ground bearing pressure help on confined or unpredictable ground. The SEM 822D steps up to 24,000 kg, a 6.4 m³ blade and a published drawbar pull of 350 kN, with an optional ripper and a winch-ready setup instead of a mandatory one. Both run a hydrostatic drive, though the 822D's is built around a Rexroth pump for its third-generation electronic control.
Choose the 818F for land-clearing, road-base or confined sites where the ripper needs to be ready from day one and tight turns matter. Choose the 822D for larger-plot grading and stronger pushing duty, where the extra blade volume and drawbar pull pay off across a full working day. Both sit in our construction dozers range, part of the wider dozer lineup and listed on the dozer comparison hub. New to dozers? Read the bulldozer guide first.
SEM 818F
Pros:
Multi-shank ripper fitted as a standard, mandatory attachment, ready for hard or unknown ground
Tighter turning radius at 3,700 mm, suits confined sites
Lower ground bearing pressure at 57 kPa, sinks less on soft ground than the 822D
Lighter at 16,950 kg, easier to transport and manoeuvre
Hydrostatic transmission gives smooth, stepless speed control
Cons:
Smaller blade at 4.3 m³, moves less material per pass than the 822D
Less powerful at 188 HP against the 822D's 235 HP
No published drawbar pull figure to compare directly against the 822D
Smaller 410-litre fuel tank than the 822D
SEM 822D
Pros:
More powerful at 235 HP
Bigger blade at 6.4 m³, moves more material per pass
Rated drawbar pull of 350 kN is published in its specifications
Larger 460-litre fuel tank for longer shifts
Hydrostatic drive built around a Rexroth pump, with third-generation electronic control
Cons:
Ripper is optional rather than fitted standard like the 818F
Wider turning radius at 4,215 mm, needs more room to turn on confined sites
Higher ground bearing pressure at 71.2 kPa, sinks more on soft ground than the 818F
Heavier at 24,000 kg, harder to manoeuvre on tight sites
Pros:
Cons:
Closing Recommendation
The SEM 818F is the steadier choice for confined sites and land-clearing work, where the ripper needs to be ready from day one and tight turns matter more than raw size. The SEM 822D fits larger-plot grading and heavier pushing duty, where its bigger blade and drawbar pull pay off across a full working day. So match the machine to your work: SEM 818F for confined sites and land-clearing with unpredictable ground, SEM 822D for larger-plot grading and heavier pushing duty.
SEM 818F Vs SEM 822D Dozer Price, Technical Specifications & Features
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
The SEM 822D is a 24-tonne construction crawler dozer powered by a 235 HP engine. Its 6.4 m³ blade provides substantial material-moving capacity for large-plot grading and highway earthwork. A 350 kN drawbar pull gives strong pushing capability through compacted subgrade. Ripper choices include a multi-shank configuration reaching 860 mm and a single-shank option for different ground requirements. The machine is also winch-ready for towing and recovery applications. Ground bearing pressure is 71.2 kPa, while ground clearance reaches 400 mm. A 380-litre fuel tank supports a full working shift. The 822D sits close to the SEM 824F, so the ripper and towing requirements can help determine which machine suits the project. The SEM 822D bulldozer price is ₹90 lakh to ₹1.10 crore. Contractors preparing large industrial plots or road packages can consider this dozer machine where stronger pushing force and blade volume affect daily output. Its operating weight places it in the larger construction class without moving fully into mining equipment. The available ripper configurations provide flexibility when soil becomes harder. Buyers can compare the 822D against the 824F based on the required attachments and ground conditions. It provides a capable construction crawler dozer for regular bulk grading, road-base preparation and larger site-development work.
61 differ · 16 identical
Key highlights: SEM 818F vs SEM 822D Dozer
SEM 818F
SEM 822D
Engine Make
Weichai WD10G190E214
Weichai WD12G240E206
Rated Engine Power
140kW (188 HP) @ 1900 rpm
175 kW (235 HP)
Maximum Torque
NA
NA
Max Forward Speed
8.0 km/h
10 km/h (0-10)
Max Drawbar Pull
NA
350 kN
Fuel Tank
410 L
460 L
Overall Width
3167 mm
3660 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
57 kPa (STD)
71.2 kPa
Blade Options
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
LGP S 5.5 m³; Coal 9.2 m³; U 7.5 m³; WH (waste handling) 12.7 m³; Forestry 8.7 m³
Ripper
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
Optional: multi-shank (penetration 860 mm; clearance 640 mm) or single-shank (737 / 742 mm); winch-ready / INI winch (FR)
AC Cabin
Standard
Standard (HVAC)
Warranty
12 months / 2000 hrs
12 Months
Key highlights: SEM 818F vs SEM 822D Dozer
SEM 818F
SEM 822D
Engine Make
Weichai WD10G190E214
Weichai WD12G240E206
Rated Engine Power
140kW (188 HP) @ 1900 rpm
175 kW (235 HP)
Maximum Torque
NA
NA
Max Forward Speed
8.0 km/h
10 km/h (0-10)
Max Drawbar Pull
NA
350 kN
Fuel Tank
410 L
460 L
Overall Width
3167 mm
3660 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
57 kPa (STD)
71.2 kPa
Blade Options
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
LGP S 5.5 m³; Coal 9.2 m³; U 7.5 m³; WH (waste handling) 12.7 m³; Forestry 8.7 m³
Ripper
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
Optional: multi-shank (penetration 860 mm; clearance 640 mm) or single-shank (737 / 742 mm); winch-ready / INI winch (FR)
Questions buyers ask about the SEM 818F vs SEM 822D
Ans.
The SEM 822D is the bigger machine. It runs 235 HP against the 818F's 188 HP, weighs 24,000 kg against 16,950 kg, and carries a 6.4 m³ blade against 4.3 m³, so it moves more material in a single pass.
Ans.
The SEM 818F does. Its multi-shank ripper is a standard, mandatory attachment, not an option. The 822D offers a ripper too, but as an optional multi-shank or single-shank fitment, along with a winch-ready setup for towing work.
Ans.
The SEM 818F turns tighter. Its minimum turning radius is 3,700 mm against the 822D's 4,215 mm, so it needs less room to bring the machine around in a tight yard or narrow plot.
Ans.
The SEM 818F sinks less. Its ground bearing pressure is 57 kPa against the 822D's 71.2 kPa. Neither machine is meant for very soft or wet fill, so check ground conditions with your dealer before committing either one.
Ans.
The SEM 822D lists a rated drawbar pull of 350 kN. The 818F's drawbar pull is not published in its specifications, so buyers should judge its pushing force mainly from its weight and blade size instead, or check with the dealer directly.
Ans.
The SEM 822D holds more fuel, with a 460-litre tank against the 818F's 410 litres. That supports its bigger blade over a longer working day without stopping to refuel as often.
SEM 818F Vs SEM 822D - Compare Price & Availability Across 600+ Locations in India
Compare SEM 818F Vs SEM 822D price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
