SEM 818F vs Zoomlion ZD220-3: the two differ on 62 of 77 listed specs. The main differences are Engine (Weichai 188 HP vs Weichai 217 HP), Price (₹70 – 85 Lakh vs ₹1.20 – 1.40 Cr), Operating Weight (16,950 kg vs 23,400 kg), Weight (16950 kg vs 23400 kg). The other 15 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
SEM 818F
Zoomlion ZD220-3
SEM 818F
VS
Zoomlion ZD220-3
Dozer
SEM 818F vs Zoomlion ZD220-3: the two differ on 62 of 77 listed specs. The main differences are Engine (Weichai 188 HP vs Weichai 217 HP), Price (₹70 – 85 Lakh vs ₹1.20 – 1.40 Cr), Operating Weight (16,950 kg vs 23,400 kg), Weight (16950 kg vs 23400 kg). The other 15 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
SEM 818F
₹70 – 85 Lakh
Zoomlion ZD220-3
₹1.20 – 1.40 Cr
Particulars
SEM 818F
Zoomlion ZD220-3
SEM 818F vs Zoomlion ZD220-3: which size of construction dozer suits your project?
The Zoomlion ZD220-3 is the much bigger machine here. It has far more engine power than the SEM 818F, a bigger blade at 6.4 cubic metres against 4.3 cubic metres, and it weighs considerably more. It also travels faster in both forward and reverse gears. The 818F holds an edge in ground bearing pressure, so it sinks less on soft ground, and it comes with a multi-shank ripper built in as standard, while the ZD220-3 does not list a ripper option at all.
Both are construction dozers, but they suit different scales of work. Smaller plots, tight yards, and jobs where ripping hard ground matters suit the 818F better. Bigger sites, bulk earthwork and jobs that need a large blade moving lots of material per pass suit the ZD220-3. See the full dozer range or the bulldozer guide to check where your job fits.
SEM 818F
Pros:
Lower ground bearing pressure, sinks less on soft ground
Ripper comes built in as standard
Lighter machine, easier to move around a tight site
Hydrostatic transmission for smooth, stepless speed control
Standard AC cabin
Cons:
Much less engine power at 188 HP against 217 HP on the ZD220-3
Smaller blade at 4.3 cubic metres, moves less material per pass
Slower top speed in both forward and reverse than the ZD220-3
Zoomlion ZD220-3
Pros:
Far more engine power at 217 HP
Bigger blade at 6.4 cubic metres, moves much more material per pass
Faster top speed in both forward and reverse
Drawbar pull rated at 178 kN for pushing through fill
Backed by a large, diversified equipment manufacturer
Cons:
Heavier machine, needs more room to manoeuvre
Higher ground bearing pressure, sinks more on soft ground
No ripper option listed, so it cannot break up hard ground
Conventional powershift gearbox rather than hydrostatic drive
Pros:
Cons:
Closing Recommendation
These two dozers are aimed at different job sizes rather than competing head to head. The SEM 818F is lighter, sinks less on soft ground and comes ready with a built-in ripper, which suits smaller plots, tight yards and mixed ground. The Zoomlion ZD220-3 brings far more engine power and a much bigger blade, so it moves more material per pass on large sites, though it has no ripper option and needs more room to work. So match the machine to your work: SEM 818F for smaller sites and mixed ground where a built-in ripper helps, Zoomlion ZD220-3 for large-scale earthwork where blade volume and travel speed matter most.
SEM 818F Vs Zoomlion ZD220-3 Dozer Price, Technical Specifications & Features
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
Agency review
Planning to buy the SEM 818F Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Zoomlion ZD220-3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
SEM 818F vs Zoomlion ZD220-3: which size of construction dozer suits your project?
The Zoomlion ZD220-3 is the much bigger machine here. It has far more engine power than the SEM 818F, a bigger blade at 6.4 cubic metres against 4.3 cubic metres, and it weighs considerably more. It also travels faster in both forward and reverse gears. The 818F holds an edge in ground bearing pressure, so it sinks less on soft ground, and it comes with a multi-shank ripper built in as standard, while the ZD220-3 does not list a ripper option at all.
Both are construction dozers, but they suit different scales of work. Smaller plots, tight yards, and jobs where ripping hard ground matters suit the 818F better. Bigger sites, bulk earthwork and jobs that need a large blade moving lots of material per pass suit the ZD220-3. See the full dozer range or the bulldozer guide to check where your job fits.
SEM 818F
Pros:
Lower ground bearing pressure, sinks less on soft ground
Ripper comes built in as standard
Lighter machine, easier to move around a tight site
Hydrostatic transmission for smooth, stepless speed control
Standard AC cabin
Cons:
Much less engine power at 188 HP against 217 HP on the ZD220-3
Smaller blade at 4.3 cubic metres, moves less material per pass
Slower top speed in both forward and reverse than the ZD220-3
Zoomlion ZD220-3
Pros:
Far more engine power at 217 HP
Bigger blade at 6.4 cubic metres, moves much more material per pass
Faster top speed in both forward and reverse
Drawbar pull rated at 178 kN for pushing through fill
Backed by a large, diversified equipment manufacturer
Cons:
Heavier machine, needs more room to manoeuvre
Higher ground bearing pressure, sinks more on soft ground
No ripper option listed, so it cannot break up hard ground
Conventional powershift gearbox rather than hydrostatic drive
Pros:
Cons:
Closing Recommendation
These two dozers are aimed at different job sizes rather than competing head to head. The SEM 818F is lighter, sinks less on soft ground and comes ready with a built-in ripper, which suits smaller plots, tight yards and mixed ground. The Zoomlion ZD220-3 brings far more engine power and a much bigger blade, so it moves more material per pass on large sites, though it has no ripper option and needs more room to work. So match the machine to your work: SEM 818F for smaller sites and mixed ground where a built-in ripper helps, Zoomlion ZD220-3 for large-scale earthwork where blade volume and travel speed matter most.
SEM 818F Vs Zoomlion ZD220-3 Dozer Price, Technical Specifications & Features
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
62 differ · 15 identical
Key highlights: SEM 818F vs Zoomlion ZD220-3 Dozer
SEM 818F
Zoomlion ZD220-3
Engine Make
Weichai WD10G190E214
Weichai WD10G220E23
Rated Engine Power
140kW (188 HP) @ 1900 rpm
162 kW (217 HP) @ 1850 rpm
Maximum Torque
NA
NA
Max Forward Speed
8.0 km/h
11.2 km/h
Max Drawbar Pull
NA
178 kN
Fuel Tank
410 L
NA
Overall Width
3167 mm
3725 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
57 kPa (STD)
71 kPa
Blade Options
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Straight tilt (std)
Ripper
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
NA
AC Cabin
Standard
NA
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Key highlights: SEM 818F vs Zoomlion ZD220-3 Dozer
SEM 818F
Zoomlion ZD220-3
Engine Make
Weichai WD10G190E214
Weichai WD10G220E23
Rated Engine Power
140kW (188 HP) @ 1900 rpm
162 kW (217 HP) @ 1850 rpm
Maximum Torque
NA
NA
Max Forward Speed
8.0 km/h
11.2 km/h
Max Drawbar Pull
NA
178 kN
Fuel Tank
410 L
NA
Overall Width
3167 mm
3725 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
57 kPa (STD)
71 kPa
Blade Options
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Straight tilt (std)
Ripper
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
NA
AC Cabin
Standard
NA
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Full specifications: SEM 818F vs Zoomlion ZD220-3 Dozer
Engine
26819
26817
Model
Weichai WD10G190E214
Weichai WD10G220E23
Fuel
Diesel
Diesel
Type
Mechanically controlled diesel
4-stroke, water-cooled, turbocharged, direct injection
Questions buyers ask about the SEM 818F vs Zoomlion ZD220-3
Ans.
The Zoomlion ZD220-3 is far more powerful, rated at 217 HP against 188 HP on the SEM 818F. That power supports its much bigger blade and heavier frame.
Ans.
The SEM 818F sinks less. Its ground bearing pressure is lower than the Zoomlion ZD220-3's, even though the ZD220-3 is the far bigger machine.
Ans.
Yes. The SEM 818F ripper is a mandatory attachment, not an option. The Zoomlion ZD220-3 does not list a ripper option at all, so it stays dedicated to grading and pushing work.
Ans.
The Zoomlion ZD220-3 blade holds 6.4 cubic metres, against 4.3 cubic metres on the SEM 818F. That is a large jump, suited to bigger earthwork jobs rather than tight site work.
Ans.
The Zoomlion ZD220-3 travels faster in both forward and reverse than the SEM 818F. On large open sites with long passes, that extra speed adds up.
Ans.
The SEM 818F suits a smaller plot better. It is lighter, sinks less on soft ground, and comes with a ripper already built in, so it needs less setup for varied ground on a compact site.
SEM 818F Vs Zoomlion ZD220-3 - Compare Price & Availability Across 600+ Locations in India
Compare SEM 818F Vs Zoomlion ZD220-3 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
