SEM 818F vs Shantui SD16E: the two differ on 63 of 77 listed specs. The main differences are Engine (Weichai 188 HP vs Weichai 160 HP), Operating Weight (16,950 kg vs 16,890 kg), Weight (16950 kg vs 16890 kg), Fuel Tank (410 L vs NA). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
SEM 818F
Shantui SD16E
SEM 818F
VS
Shantui SD16E
Dozer
SEM 818F vs Shantui SD16E: the two differ on 63 of 77 listed specs. The main differences are Engine (Weichai 188 HP vs Weichai 160 HP), Operating Weight (16,950 kg vs 16,890 kg), Weight (16950 kg vs 16890 kg), Fuel Tank (410 L vs NA). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
SEM 818F
₹70 – 85 Lakh
Shantui SD16E
₹70 – 85 Lakh
Particulars
SEM 818F
Shantui SD16E
SEM 818F vs Shantui SD16E: which construction dozer suits your site?
The SEM 818F has more engine power than the Shantui SD16E, and it runs on a hydrostatic drive that gives smooth, stepless speed control. Its ground bearing pressure is also lower, so it sinks less on soft ground, and it comes with a ripper built in as standard. The SD16E uses an older-style conventional powershift gearbox with fixed gears instead, which keeps the machine simple and easy to service almost anywhere, since its engine platform is one of the most common in the region. It runs a little faster in both directions and carries a slightly bigger blade, and its blade can drop deeper below ground level.
Both are construction dozers in a similar weight class, so the real difference is drive type and where you can get support. Sites that value smooth hydrostatic control and a built-in ripper for uncertain ground suit the 818F. Sites in remote areas, where simple mechanical parts and widely available service matter more than refinement, suit the SD16E. Browse the full dozer range or read the bulldozer guide before you decide.
SEM 818F
Pros:
More engine power at 188 HP
Hydrostatic transmission gives smooth, stepless speed control
Lower ground bearing pressure, sinks less on soft ground
Ripper comes built in as standard
Higher hydraulic relief pressure for implement work
Cons:
Slower top speed in both forward and reverse than the SD16E
Smaller blade at 4.3 cubic metres against 4.5 on the SD16E
Blade does not drop as deep below ground level as the SD16E's
Shantui SD16E
Pros:
Widely used engine and gearbox platform, so parts and service are easy to find in remote areas
Optional 3-shank ripper available when the ground needs it
Cons:
Less engine power at 160 HP
Conventional powershift gearbox is less smooth than the 818F's hydrostatic drive
Higher ground bearing pressure, sinks more on soft ground
Ripper is optional, not built in, so it costs extra if needed
Pros:
Cons:
Closing Recommendation
These two dozers sit close in weight but take different approaches to drive and control. The SEM 818F gives the driver smoother hydrostatic control, more power, lower ground pressure and a ripper that is already built in. The Shantui SD16E leans on a simple, widely used mechanical platform that is easy to keep running far from a dealer, with a slightly bigger blade and faster travel speeds. Your choice mostly comes down to how much you value smooth hydrostatic control against ease of service in remote areas. So match the machine to your work: SEM 818F for smoother operation and unpredictable or harder ground, Shantui SD16E for remote sites where simple parts and easy service matter more than refinement.
SEM 818F Vs Shantui SD16E Dozer Price, Technical Specifications & Features
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
The Shantui SD16E is a 16.9-tonne construction crawler dozer powered by a 160 HP engine. Its 4.5 m³ blade handles regular grading and spreading, while an optional 3-shank ripper reaches 572 mm for light breaking. Ground bearing pressure is 74 kPa, making established and reasonably firm sites a better fit. Rated gradeability reaches 30 degrees, supporting regular sloped-site work. Straight-tilt, angle and U-blade configurations provide different working options. A 315-litre fuel tank supports standard shifts, while ground clearance is 320 mm. The SD16E sits close to the DH16B3 and DH17B3, so buyers can compare the specifications against their typical applications. Road-base preparation, site clearing and general construction grading are suitable uses. The Shantui SD16E bulldozer price is ₹70 lakh to ₹85 lakh. Infrastructure contractors working on predictable ground can consider this dozer machine for regular earthwork. The optional ripper provides additional capability without changing the primary grading role. Its operating weight keeps it below heavier construction crawler dozers. Buyers can choose between the available blade configurations according to the material and finishing requirement. The SD16E offers a practical construction option for contractors who need regular grading with occasional light ripping.
Agency review
Planning to buy the SEM 818F Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Shantui SD16E Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
SEM 818F vs Shantui SD16E: which construction dozer suits your site?
The SEM 818F has more engine power than the Shantui SD16E, and it runs on a hydrostatic drive that gives smooth, stepless speed control. Its ground bearing pressure is also lower, so it sinks less on soft ground, and it comes with a ripper built in as standard. The SD16E uses an older-style conventional powershift gearbox with fixed gears instead, which keeps the machine simple and easy to service almost anywhere, since its engine platform is one of the most common in the region. It runs a little faster in both directions and carries a slightly bigger blade, and its blade can drop deeper below ground level.
Both are construction dozers in a similar weight class, so the real difference is drive type and where you can get support. Sites that value smooth hydrostatic control and a built-in ripper for uncertain ground suit the 818F. Sites in remote areas, where simple mechanical parts and widely available service matter more than refinement, suit the SD16E. Browse the full dozer range or read the bulldozer guide before you decide.
SEM 818F
Pros:
More engine power at 188 HP
Hydrostatic transmission gives smooth, stepless speed control
Lower ground bearing pressure, sinks less on soft ground
Ripper comes built in as standard
Higher hydraulic relief pressure for implement work
Cons:
Slower top speed in both forward and reverse than the SD16E
Smaller blade at 4.3 cubic metres against 4.5 on the SD16E
Blade does not drop as deep below ground level as the SD16E's
Shantui SD16E
Pros:
Widely used engine and gearbox platform, so parts and service are easy to find in remote areas
Optional 3-shank ripper available when the ground needs it
Cons:
Less engine power at 160 HP
Conventional powershift gearbox is less smooth than the 818F's hydrostatic drive
Higher ground bearing pressure, sinks more on soft ground
Ripper is optional, not built in, so it costs extra if needed
Pros:
Cons:
Closing Recommendation
These two dozers sit close in weight but take different approaches to drive and control. The SEM 818F gives the driver smoother hydrostatic control, more power, lower ground pressure and a ripper that is already built in. The Shantui SD16E leans on a simple, widely used mechanical platform that is easy to keep running far from a dealer, with a slightly bigger blade and faster travel speeds. Your choice mostly comes down to how much you value smooth hydrostatic control against ease of service in remote areas. So match the machine to your work: SEM 818F for smoother operation and unpredictable or harder ground, Shantui SD16E for remote sites where simple parts and easy service matter more than refinement.
SEM 818F Vs Shantui SD16E Dozer Price, Technical Specifications & Features
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
The Shantui SD16E is a 16.9-tonne construction crawler dozer powered by a 160 HP engine. Its 4.5 m³ blade handles regular grading and spreading, while an optional 3-shank ripper reaches 572 mm for light breaking. Ground bearing pressure is 74 kPa, making established and reasonably firm sites a better fit. Rated gradeability reaches 30 degrees, supporting regular sloped-site work. Straight-tilt, angle and U-blade configurations provide different working options. A 315-litre fuel tank supports standard shifts, while ground clearance is 320 mm. The SD16E sits close to the DH16B3 and DH17B3, so buyers can compare the specifications against their typical applications. Road-base preparation, site clearing and general construction grading are suitable uses. The Shantui SD16E bulldozer price is ₹70 lakh to ₹85 lakh. Infrastructure contractors working on predictable ground can consider this dozer machine for regular earthwork. The optional ripper provides additional capability without changing the primary grading role. Its operating weight keeps it below heavier construction crawler dozers. Buyers can choose between the available blade configurations according to the material and finishing requirement. The SD16E offers a practical construction option for contractors who need regular grading with occasional light ripping.
63 differ · 14 identical
Key highlights: SEM 818F vs Shantui SD16E Dozer
SEM 818F
Shantui SD16E
Engine Make
Weichai WD10G190E214
Weichai WD10G178E25
Rated Engine Power
140kW (188 HP) @ 1900 rpm
120 kW (160 HP) @ 1850 rpm
Maximum Torque
NA
765 Nm @ 1300 rpm
Max Forward Speed
8.0 km/h
9.63 km/h
Max Drawbar Pull
NA
NA
Fuel Tank
410 L
NA
Overall Width
3167 mm
3388-3970 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
57 kPa (STD)
74 kPa
Blade Options
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Angle, or U blade, Straight Tilt
Ripper
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
Questions buyers ask about the SEM 818F vs Shantui SD16E
Ans.
The SEM 818F has more engine power, rated at 188 HP against 160 HP on the Shantui SD16E. That extra power helps the 818F keep working pace under a loaded blade.
Ans.
The SEM 818F uses a hydrostatic transmission with infinitely variable speed, so the driver gets smooth, stepless control. The Shantui SD16E uses a conventional powershift gearbox with 3 forward and 3 reverse gears instead, a simpler and older style of drive.
Ans.
The SEM 818F sinks less. Its ground bearing pressure is lower than the Shantui SD16E's, which helps when working on freshly filled or loose ground.
Ans.
Yes. The SEM 818F ripper is a mandatory attachment, not an option. The Shantui SD16E offers a 3-shank ripper as an optional extra instead, so you only pay for it if your site needs it.
Ans.
The Shantui SD16E tends to be easier in remote areas. Its engine and gearbox platform is one of the most widely used in the region, so mechanics, filters and spare parts are common even far from a dealer. The SEM 818F relies more on its dealer network for hydrostatic system support.
Ans.
The Shantui SD16E is faster in both directions. It has a higher top forward speed and a higher top reverse speed than the SEM 818F, which can save time on repeated short passes.
SEM 818F Vs Shantui SD16E - Compare Price & Availability Across 600+ Locations in India
Compare SEM 818F Vs Shantui SD16E price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
