Shantui DH24C3 vs CASE 1650L: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 265 HP vs FPT 146 HP), Price (₹1 – 1.20 Cr vs ₹90 Lakh – 1.10 Cr), Operating Weight (23,820 kg vs 17,960 kg), Weight (23820 kg vs 17960 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH24C3
CASE 1650L
Shantui DH24C3
VS
CASE 1650L
Dozer
Shantui DH24C3 vs CASE 1650L: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 265 HP vs FPT 146 HP), Price (₹1 – 1.20 Cr vs ₹90 Lakh – 1.10 Cr), Operating Weight (23,820 kg vs 17,960 kg), Weight (23820 kg vs 17960 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH24C3
₹1 – 1.20 Cr
CASE 1650L
₹90 Lakh – 1.10 Cr
Particulars
Shantui DH24C3
CASE 1650L
CASE 1650L vs Shantui DH24C3: Which Dozer Fits Your Project
The Shantui DH24C3 is a much bigger machine than the CASE 1650L, with close to a third more operating weight, a far bigger blade and a rated drawbar pull well above the 1650L's. It also sits higher off the ground, which helps on rough or uneven sites. The 1650L stays in the mid-size class, built around finish grading with a lower ground bearing pressure and a standard AC cabin, while the DH24C3 does not list one.
Choose the DH24C3 for large-plot development and highway earthwork where blade volume and pushing force decide daily output. Choose the CASE 1650L when the job stays grading-led and the ground is softer. Browse more construction dozers or the full dozer lineup.
CASE 1650L
Pros:
Lower ground bearing pressure for soft or freshly worked ground
Standard AC cabin with an air-suspension seat
PAT blade for angle and tilt during finish grading
Lighter and easier to manoeuvre on tighter plots
Published ripper penetration depth for planning purposes
Cons:
Much smaller blade capacity than the DH24C3
Lower rated drawbar pull
Less ground clearance for rough or uneven terrain
Shantui DH24C3
Pros:
Much bigger blade capacity for large-scale earthwork
Higher rated drawbar pull for heavier pushing
Higher ground clearance for rough or uneven sites
Higher engine power and torque
Wide Shantui parts and service network in India
Cons:
No standard AC cabin listed
Higher ground bearing pressure than the CASE 1650L
Larger machine, so less manoeuvrable on tight plots
Ripper penetration depth not published
Pros:
Cons:
Closing Recommendation
These two dozers are built for different scales of work. The Shantui DH24C3 brings a much bigger blade, stronger pushing force and more ground clearance for rough, large sites, while the CASE 1650L keeps a lighter footprint, finer blade control and a more comfortable cabin. So match the machine to your work: CASE 1650L for grading-led construction on softer ground, Shantui DH24C3 for large-plot and highway earthwork.
Shantui DH24C3 Vs CASE 1650L Dozer Price, Technical Specifications & Features
The Shantui DH24C3 is a 23.8-tonne construction crawler dozer powered by a 265 HP engine. Its 6.5 m³ blade provides substantial material-moving capacity, while the 368 kN drawbar pull gives strong pushing force for larger earthwork. An optional ripper adds capability when harder patches appear. Ground bearing pressure is 68.3 kPa, and ground clearance reaches 540 mm. Rated gradeability of 30 degrees supports sloped-site applications. The DH24C3 is the largest of Shantui's DH-series construction dozers listed here. Large-plot development and highway earthwork are suitable applications where blade volume affects daily output. A 489-litre fuel tank supports a full working shift. The Shantui DH24C3 bulldozer price is ₹1 crore to ₹1.20 crore. Contractors can consider this dozer machine when smaller models cannot move enough material per pass. Its operating weight places it close to entry-level mining equipment, but its role remains construction earthwork. The optional ripper provides flexibility for changing soil conditions. Buyers working on highway projects can compare its blade capacity and drawbar pull with the DH17B3 before selecting the larger machine. The DH24C3 suits contractors who need higher output across large grading areas without moving fully into mining-class crawler dozers.
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
Agency review
Planning to buy the Shantui DH24C3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the CASE 1650L Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 1650L vs Shantui DH24C3: Which Dozer Fits Your Project
The Shantui DH24C3 is a much bigger machine than the CASE 1650L, with close to a third more operating weight, a far bigger blade and a rated drawbar pull well above the 1650L's. It also sits higher off the ground, which helps on rough or uneven sites. The 1650L stays in the mid-size class, built around finish grading with a lower ground bearing pressure and a standard AC cabin, while the DH24C3 does not list one.
Choose the DH24C3 for large-plot development and highway earthwork where blade volume and pushing force decide daily output. Choose the CASE 1650L when the job stays grading-led and the ground is softer. Browse more construction dozers or the full dozer lineup.
CASE 1650L
Pros:
Lower ground bearing pressure for soft or freshly worked ground
Standard AC cabin with an air-suspension seat
PAT blade for angle and tilt during finish grading
Lighter and easier to manoeuvre on tighter plots
Published ripper penetration depth for planning purposes
Cons:
Much smaller blade capacity than the DH24C3
Lower rated drawbar pull
Less ground clearance for rough or uneven terrain
Shantui DH24C3
Pros:
Much bigger blade capacity for large-scale earthwork
Higher rated drawbar pull for heavier pushing
Higher ground clearance for rough or uneven sites
Higher engine power and torque
Wide Shantui parts and service network in India
Cons:
No standard AC cabin listed
Higher ground bearing pressure than the CASE 1650L
Larger machine, so less manoeuvrable on tight plots
Ripper penetration depth not published
Pros:
Cons:
Closing Recommendation
These two dozers are built for different scales of work. The Shantui DH24C3 brings a much bigger blade, stronger pushing force and more ground clearance for rough, large sites, while the CASE 1650L keeps a lighter footprint, finer blade control and a more comfortable cabin. So match the machine to your work: CASE 1650L for grading-led construction on softer ground, Shantui DH24C3 for large-plot and highway earthwork.
Shantui DH24C3 Vs CASE 1650L Dozer Price, Technical Specifications & Features
The Shantui DH24C3 is a 23.8-tonne construction crawler dozer powered by a 265 HP engine. Its 6.5 m³ blade provides substantial material-moving capacity, while the 368 kN drawbar pull gives strong pushing force for larger earthwork. An optional ripper adds capability when harder patches appear. Ground bearing pressure is 68.3 kPa, and ground clearance reaches 540 mm. Rated gradeability of 30 degrees supports sloped-site applications. The DH24C3 is the largest of Shantui's DH-series construction dozers listed here. Large-plot development and highway earthwork are suitable applications where blade volume affects daily output. A 489-litre fuel tank supports a full working shift. The Shantui DH24C3 bulldozer price is ₹1 crore to ₹1.20 crore. Contractors can consider this dozer machine when smaller models cannot move enough material per pass. Its operating weight places it close to entry-level mining equipment, but its role remains construction earthwork. The optional ripper provides flexibility for changing soil conditions. Buyers working on highway projects can compare its blade capacity and drawbar pull with the DH17B3 before selecting the larger machine. The DH24C3 suits contractors who need higher output across large grading areas without moving fully into mining-class crawler dozers.
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
67 differ · 10 identical
Key highlights: Shantui DH24C3 vs CASE 1650L Dozer
Shantui DH24C3
CASE 1650L
Engine Make
Weichai WP12G290E304
FPT Industrial F4HE9684U
Rated Engine Power
198 kW (265 HP) @ 1900 rpm
107 kW (146 HP) @ 2200 rpm
Maximum Torque
1457 Nm @ 1200-1500 rpm
690 Nm @ 1400 rpm
Max Forward Speed
10 (0-10) km/h
9.7 km/h
Max Drawbar Pull
368 kN
275 kN
Fuel Tank
489 L
300 L
Overall Width
3642 mm
3200 mm
Track Shoe Width
560 mm
559 mm
Ground Bearing Pressure
68.3 kPa
46.1 kPa
Blade Options
Coal blade 7.5 m3 also available
PAT std
Ripper
Optional
3-shank ripper optional (1600 kg); penetration 478 mm
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Key highlights: Shantui DH24C3 vs CASE 1650L Dozer
Shantui DH24C3
CASE 1650L
Engine Make
Weichai WP12G290E304
FPT Industrial F4HE9684U
Rated Engine Power
198 kW (265 HP) @ 1900 rpm
107 kW (146 HP) @ 2200 rpm
Maximum Torque
1457 Nm @ 1200-1500 rpm
690 Nm @ 1400 rpm
Max Forward Speed
10 (0-10) km/h
9.7 km/h
Max Drawbar Pull
368 kN
275 kN
Fuel Tank
489 L
300 L
Overall Width
3642 mm
3200 mm
Track Shoe Width
560 mm
559 mm
Ground Bearing Pressure
68.3 kPa
46.1 kPa
Blade Options
Coal blade 7.5 m3 also available
PAT std
Ripper
Optional
3-shank ripper optional (1600 kg); penetration 478 mm
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Full specifications: Shantui DH24C3 vs CASE 1650L Dozer
Questions buyers ask about the Shantui DH24C3 vs CASE 1650L
Ans.
It carries close to a third more operating weight, a much bigger blade and a rated drawbar pull well above the 1650L's, putting it in a heavier working class.
Ans.
The CASE 1650L is. Its ground bearing pressure is lower than the DH24C3's, so it spreads its weight better on loose or freshly worked fill.
Ans.
The Shantui DH24C3 does, by a wide margin. This helps it cross uneven or rutted ground without dragging its underside.
Ans.
No, the spec sheet does not list AC as standard. The CASE 1650L comes with a standard AC cabin and an air-suspension seat.
Ans.
The Shantui DH24C3 does. Its bigger blade and stronger drawbar pull cut down the number of passes needed on large, open ground.
Ans.
Yes, an optional ripper is listed, though without a stated penetration depth. The CASE 1650L publishes its ripper's penetration depth for comparison.
Shantui DH24C3 Vs CASE 1650L - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH24C3 Vs CASE 1650L price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
