Shantui DH24C3 vs SEM 818F: the two differ on 69 of 77 listed specs. The main differences are Engine (Weichai 265 HP vs Weichai 188 HP), Price (₹1 – 1.20 Cr vs ₹70 – 85 Lakh), Operating Weight (23,820 kg vs 16,950 kg), Weight (23820 kg vs 16950 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH24C3
SEM 818F
Shantui DH24C3
VS
SEM 818F
Dozer
Shantui DH24C3 vs SEM 818F: the two differ on 69 of 77 listed specs. The main differences are Engine (Weichai 265 HP vs Weichai 188 HP), Price (₹1 – 1.20 Cr vs ₹70 – 85 Lakh), Operating Weight (23,820 kg vs 16,950 kg), Weight (23820 kg vs 16950 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH24C3
₹1 – 1.20 Cr
SEM 818F
₹70 – 85 Lakh
Particulars
Shantui DH24C3
SEM 818F
SEM 818F vs Shantui DH24C3: which size of construction dozer fits your project?
The Shantui DH24C3 is the much bigger machine here. It has far more engine power than the SEM 818F, a bigger fuel tank, more ground clearance, and a blade that holds 6.5 cubic metres against 4.3 cubic metres on the 818F. It is also the heavier machine by a wide margin. The 818F answers back with lower ground bearing pressure, so it sinks less on soft or freshly worked ground, and it turns in a tighter circle on a small site. The 818F also comes with a ripper built in as standard, while the DH24C3 only offers one as an option.
Both fall under the construction dozers category, but they are really aimed at different job sizes. Smaller plots, tight yards and general site work suit the 818F, where its lighter weight and standard ripper cover most needs. Large-plot development, highway earthwork and jobs that need heavy daily output suit the DH24C3, where the bigger blade and engine move far more material per shift. See the full dozer range or the bulldozer guide to check where your job size sits.
SEM 818F
Pros:
Lower ground bearing pressure, sinks less on soft ground
Tighter turning radius, easier to manoeuvre on small sites
Ripper comes built in as standard
Lighter machine, suits smaller plots and general site work
Smaller fuel tank still covers a full working shift
Cons:
Much less engine power at 188 HP against 265 HP on the DH24C3
Smaller blade at 4.3 cubic metres, moves less material per pass
Less ground clearance than the DH24C3
Shantui DH24C3
Pros:
Far more engine power at 265 HP
Bigger blade at 6.5 cubic metres, moves much more material per pass
Bigger fuel tank for long working shifts
More ground clearance, better for rough or uneven large sites
Drawbar pull rated at 368 kN for heavy pushing work
Cons:
Heavier machine, harder to move around a tight site
Higher ground bearing pressure, sinks more on soft ground
Wider turning radius than the SEM 818F
Ripper is optional, not built in, so it adds cost if needed
Pros:
Cons:
Closing Recommendation
These two dozers sit at different points in the construction range, so the choice is mostly about job size. The SEM 818F is lighter, turns tighter and comes with a ripper built in, which suits smaller plots, tight yards and general site work where a heavy machine would be overkill. The Shantui DH24C3 brings much more engine power and a far bigger blade, so it moves more material per pass on large sites, though it needs more room to work and sinks a little more on soft ground. So match the machine to your work: SEM 818F for smaller sites and tight yards where manoeuvring matters, Shantui DH24C3 for large-plot development and highway earthwork where daily output counts most.
Shantui DH24C3 Vs SEM 818F Dozer Price, Technical Specifications & Features
The Shantui DH24C3 is a 23.8-tonne construction crawler dozer powered by a 265 HP engine. Its 6.5 m³ blade provides substantial material-moving capacity, while the 368 kN drawbar pull gives strong pushing force for larger earthwork. An optional ripper adds capability when harder patches appear. Ground bearing pressure is 68.3 kPa, and ground clearance reaches 540 mm. Rated gradeability of 30 degrees supports sloped-site applications. The DH24C3 is the largest of Shantui's DH-series construction dozers listed here. Large-plot development and highway earthwork are suitable applications where blade volume affects daily output. A 489-litre fuel tank supports a full working shift. The Shantui DH24C3 bulldozer price is ₹1 crore to ₹1.20 crore. Contractors can consider this dozer machine when smaller models cannot move enough material per pass. Its operating weight places it close to entry-level mining equipment, but its role remains construction earthwork. The optional ripper provides flexibility for changing soil conditions. Buyers working on highway projects can compare its blade capacity and drawbar pull with the DH17B3 before selecting the larger machine. The DH24C3 suits contractors who need higher output across large grading areas without moving fully into mining-class crawler dozers.
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
Agency review
Planning to buy the Shantui DH24C3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the SEM 818F Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
SEM 818F vs Shantui DH24C3: which size of construction dozer fits your project?
The Shantui DH24C3 is the much bigger machine here. It has far more engine power than the SEM 818F, a bigger fuel tank, more ground clearance, and a blade that holds 6.5 cubic metres against 4.3 cubic metres on the 818F. It is also the heavier machine by a wide margin. The 818F answers back with lower ground bearing pressure, so it sinks less on soft or freshly worked ground, and it turns in a tighter circle on a small site. The 818F also comes with a ripper built in as standard, while the DH24C3 only offers one as an option.
Both fall under the construction dozers category, but they are really aimed at different job sizes. Smaller plots, tight yards and general site work suit the 818F, where its lighter weight and standard ripper cover most needs. Large-plot development, highway earthwork and jobs that need heavy daily output suit the DH24C3, where the bigger blade and engine move far more material per shift. See the full dozer range or the bulldozer guide to check where your job size sits.
SEM 818F
Pros:
Lower ground bearing pressure, sinks less on soft ground
Tighter turning radius, easier to manoeuvre on small sites
Ripper comes built in as standard
Lighter machine, suits smaller plots and general site work
Smaller fuel tank still covers a full working shift
Cons:
Much less engine power at 188 HP against 265 HP on the DH24C3
Smaller blade at 4.3 cubic metres, moves less material per pass
Less ground clearance than the DH24C3
Shantui DH24C3
Pros:
Far more engine power at 265 HP
Bigger blade at 6.5 cubic metres, moves much more material per pass
Bigger fuel tank for long working shifts
More ground clearance, better for rough or uneven large sites
Drawbar pull rated at 368 kN for heavy pushing work
Cons:
Heavier machine, harder to move around a tight site
Higher ground bearing pressure, sinks more on soft ground
Wider turning radius than the SEM 818F
Ripper is optional, not built in, so it adds cost if needed
Pros:
Cons:
Closing Recommendation
These two dozers sit at different points in the construction range, so the choice is mostly about job size. The SEM 818F is lighter, turns tighter and comes with a ripper built in, which suits smaller plots, tight yards and general site work where a heavy machine would be overkill. The Shantui DH24C3 brings much more engine power and a far bigger blade, so it moves more material per pass on large sites, though it needs more room to work and sinks a little more on soft ground. So match the machine to your work: SEM 818F for smaller sites and tight yards where manoeuvring matters, Shantui DH24C3 for large-plot development and highway earthwork where daily output counts most.
Shantui DH24C3 Vs SEM 818F Dozer Price, Technical Specifications & Features
The Shantui DH24C3 is a 23.8-tonne construction crawler dozer powered by a 265 HP engine. Its 6.5 m³ blade provides substantial material-moving capacity, while the 368 kN drawbar pull gives strong pushing force for larger earthwork. An optional ripper adds capability when harder patches appear. Ground bearing pressure is 68.3 kPa, and ground clearance reaches 540 mm. Rated gradeability of 30 degrees supports sloped-site applications. The DH24C3 is the largest of Shantui's DH-series construction dozers listed here. Large-plot development and highway earthwork are suitable applications where blade volume affects daily output. A 489-litre fuel tank supports a full working shift. The Shantui DH24C3 bulldozer price is ₹1 crore to ₹1.20 crore. Contractors can consider this dozer machine when smaller models cannot move enough material per pass. Its operating weight places it close to entry-level mining equipment, but its role remains construction earthwork. The optional ripper provides flexibility for changing soil conditions. Buyers working on highway projects can compare its blade capacity and drawbar pull with the DH17B3 before selecting the larger machine. The DH24C3 suits contractors who need higher output across large grading areas without moving fully into mining-class crawler dozers.
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
69 differ · 8 identical
Key highlights: Shantui DH24C3 vs SEM 818F Dozer
Shantui DH24C3
SEM 818F
Engine Make
Weichai WP12G290E304
Weichai WD10G190E214
Rated Engine Power
198 kW (265 HP) @ 1900 rpm
140kW (188 HP) @ 1900 rpm
Maximum Torque
1457 Nm @ 1200-1500 rpm
NA
Max Forward Speed
10 (0-10) km/h
8.0 km/h
Max Drawbar Pull
368 kN
NA
Fuel Tank
489 L
410 L
Overall Width
3642 mm
3167 mm
Track Shoe Width
560 mm
510 mm
Ground Bearing Pressure
68.3 kPa
57 kPa (STD)
Blade Options
Coal blade 7.5 m3 also available
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Ripper
Optional
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Key highlights: Shantui DH24C3 vs SEM 818F Dozer
Shantui DH24C3
SEM 818F
Engine Make
Weichai WP12G290E304
Weichai WD10G190E214
Rated Engine Power
198 kW (265 HP) @ 1900 rpm
140kW (188 HP) @ 1900 rpm
Maximum Torque
1457 Nm @ 1200-1500 rpm
NA
Max Forward Speed
10 (0-10) km/h
8.0 km/h
Max Drawbar Pull
368 kN
NA
Fuel Tank
489 L
410 L
Overall Width
3642 mm
3167 mm
Track Shoe Width
560 mm
510 mm
Ground Bearing Pressure
68.3 kPa
57 kPa (STD)
Blade Options
Coal blade 7.5 m3 also available
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Ripper
Optional
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Full specifications: Shantui DH24C3 vs SEM 818F Dozer
Questions buyers ask about the Shantui DH24C3 vs SEM 818F
Ans.
The Shantui DH24C3 is far more powerful. It is rated at 265 HP against 188 HP on the SEM 818F. That extra power is what lets it carry a much bigger blade and still keep working pace.
Ans.
The SEM 818F sinks less. Its ground bearing pressure is lower than the Shantui DH24C3's, even though the DH24C3 is a far bigger and heavier machine overall.
Ans.
The Shantui DH24C3 blade holds 6.5 cubic metres, against 4.3 cubic metres on the SEM 818F. That is a large step up in material moved per pass, which suits bigger earthwork jobs.
Ans.
Yes. The SEM 818F ripper is a mandatory attachment, not an option, so it is ready for hard ground from day one. The Shantui DH24C3 offers a ripper only as an optional extra.
Ans.
The SEM 818F turns tighter. Its minimum turning radius is 3,700 mm against 4,210 mm on the DH24C3. On a cramped yard, that smaller turning circle matters more than raw size.
Ans.
The Shantui DH24C3 has much more ground clearance, useful when crossing rough or uneven ground on a large site. The SEM 818F sits lower, which suits smaller, more level working areas.
Shantui DH24C3 Vs SEM 818F - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH24C3 Vs SEM 818F price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
