Contact Us



    Chat with us

    XCMG XE380C GM VS Liugong 935E HD Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights XCMG XE380C GMLiugong 935E HD
    XCMG XE380C GM VS Liugong 935E HD Excavator
    XCMG XE380C GM Large (25-50 Ton)
    XCMG XE380C GM

    ₹1.14 - 1.16 crore

    desi machines-excavator-liugong-935e-hd-featured alt
    Liugong 935E HD

    ₹82 - 88 lakh

    Particulars XCMG XE380C GM Liugong 935E HD

    Liugong 935E HD vs XCMG XE380C GM: Which Excavator to Buy?

    Both these are large excavators for heavy earthmoving, but they suit different ground and dig conditions. The Liugong 935E HD handles steep or sloped sites well, with strong gradeability and a long undercarriage for stability. The XCMG XE380C GM is built for deep digging, reaching further down than the Liugong, and it comes with an AC cabin as standard for the driver.

    For hill sites, quarries or sloped ground, the Liugong 935E HD's climbing ability and steady base make it the safer pick. For deep foundation or basement work where you need to dig further down, the XCMG XE380C GM's extra depth gets the job done in fewer passes. Its larger fuel tank also means fewer stops on long shifts. Compare the full Liugong excavator range and XCMG excavator range, browse all excavators, or read about excavator uses on different jobs.

    Liugong 935E HD

    Pros:

    • Large 1.9 m³ bucket capacity for efficient load handling
    • Cummins engine with a high torque output of 895 Nm
    • Strong bucket digging force of 187 kN for tough conditions
    • Extended undercarriage length of 4944 mm for stability
    • High gradeability of 70% suitable for steep terrains

    Cons:

    • No AC cabin which may limit operator comfort
    • GPS not available, may hinder fleet management capabilities
    • Lower engine power compared to XCMG XE380C GM

    XCMG XE380C GM

    Pros:

    • Higher engine power at 259 HP for heavy-duty applications
    • AC cabin comes standard, enhancing operator comfort
    • Larger fuel tank capacity of 630 L for extended operation times
    • Greater digging depth at 6927 mm for deep excavations

    Cons:

    • Bucket digging force not specified, which is crucial for performance assessment
    • Operating weight is higher, which could affect transportability and fuel efficiency
    • Swing speed is slightly lower than Liugong 935E HD

    Pros:

    Cons:

    Closing Recommendation

    Choose the XCMG XE380C GM when you need more engine power, driver comfort with an AC cabin, and deeper digging reach for foundation work. Choose the Liugong 935E HD when your site is steep or sloped and needs strong climbing ability and digging force, even without an AC cabin or GPS. Both are capable heavy excavators, so pick based on your ground conditions and how deep you need to dig. So match the machine to your work: XCMG XE380C GM for deep digging and driver comfort, Liugong 935E HD for steep or sloped heavy-duty sites.

    XCMG XE380C GM Vs Liugong 935E HD Excavator Price, Technical Specifications & Features

    Brand XCMG Excavator LiuGong Excavator
    Type Large (25-50 Ton) Large (25-50 Ton)
    Operating Cost ₹1.0 - 1.2 crore ₹82 - 88 lakh
    Price ₹1.14 - 1.16 crore ₹82 - 88 lakh
    Weight 36600 Kg 33600 Kg
    Bucket 1.5 - 2.1 m³ 1.9 m³
    Max Digging Depth 6927 mm 6825 mm
    Engine Isuzu 259 HP Cummins 227 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 6400 mm 6200 mm
    Quick Overview:

    The XCMG XE380C GM is a 36-ton excavator designed for heavy construction, quarrying, mining, and large-scale earthmoving tasks that require maximum power and high productivity. An Isuzu AA-6HK1XQP 6-cylinder turbocharged diesel engine with a rating of 259 HP drives the machine, providing solid torque and reliable performance under heavy workloads and long operating hours. Weighing about 36,600 kg, the XE380C GM from XCMG Construction Equipment offers a stable and balanced platform for deep excavation and high-volume material handling on tough terrain. Its bucket capacity of 1.5 to 2.1 m³ allows for quick and efficient processing of large amounts of soil, rock, and aggregate during every working cycle. With a maximum digging depth of 6,927 mm and a maximum digging reach of around 10,470 mm, it excels in deep pit work, quarry benching, and wide-area excavation tasks. An intelligent hydraulic system with dual variable-displacement axial piston pumps and multiple working modes balances performance and fuel efficiency for high-output operation. The ROPS/FOPS-certified air-conditioned cabin offers 360° visibility and a 7″ instrument cluster, ensuring safe, comfortable, and informed operation throughout the day. The XCMG XE380C GM price in India ranges from Rs. 1.1 to 1.2 crore. This XCMG excavator is a powerful asset for mining companies, large quarry operators, and heavy civil contractors who need maximum digging power and dependable high-volume output from their equipment.

    A large excavator built for demanding tasks, Liugong 935E HD  from Liugong Construction Equipment ensures maximum durability and efficiency for heavy construction projects.

    Agency review

    Planning to buy the XCMG XE380C GM Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Liugong 935E HD Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Liugong 935E HD vs XCMG XE380C GM: Which Excavator to Buy?

    Both these are large excavators for heavy earthmoving, but they suit different ground and dig conditions. The Liugong 935E HD handles steep or sloped sites well, with strong gradeability and a long undercarriage for stability. The XCMG XE380C GM is built for deep digging, reaching further down than the Liugong, and it comes with an AC cabin as standard for the driver.

    For hill sites, quarries or sloped ground, the Liugong 935E HD's climbing ability and steady base make it the safer pick. For deep foundation or basement work where you need to dig further down, the XCMG XE380C GM's extra depth gets the job done in fewer passes. Its larger fuel tank also means fewer stops on long shifts. Compare the full Liugong excavator range and XCMG excavator range, browse all excavators, or read about excavator uses on different jobs.

    Liugong 935E HD

    Pros:

    • Large 1.9 m³ bucket capacity for efficient load handling
    • Cummins engine with a high torque output of 895 Nm
    • Strong bucket digging force of 187 kN for tough conditions
    • Extended undercarriage length of 4944 mm for stability
    • High gradeability of 70% suitable for steep terrains

    Cons:

    • No AC cabin which may limit operator comfort
    • GPS not available, may hinder fleet management capabilities
    • Lower engine power compared to XCMG XE380C GM

    XCMG XE380C GM

    Pros:

    • Higher engine power at 259 HP for heavy-duty applications
    • AC cabin comes standard, enhancing operator comfort
    • Larger fuel tank capacity of 630 L for extended operation times
    • Greater digging depth at 6927 mm for deep excavations

    Cons:

    • Bucket digging force not specified, which is crucial for performance assessment
    • Operating weight is higher, which could affect transportability and fuel efficiency
    • Swing speed is slightly lower than Liugong 935E HD

    Pros:

    Cons:

    Closing Recommendation

    Choose the XCMG XE380C GM when you need more engine power, driver comfort with an AC cabin, and deeper digging reach for foundation work. Choose the Liugong 935E HD when your site is steep or sloped and needs strong climbing ability and digging force, even without an AC cabin or GPS. Both are capable heavy excavators, so pick based on your ground conditions and how deep you need to dig. So match the machine to your work: XCMG XE380C GM for deep digging and driver comfort, Liugong 935E HD for steep or sloped heavy-duty sites.

    XCMG XE380C GM Vs Liugong 935E HD Excavator Price, Technical Specifications & Features

    XCMG XE380C GM Liugong 935E HD
    Brand
    XCMG Excavator LiuGong Excavator
    Type
    Large (25-50 Ton) Large (25-50 Ton)
    Price
    ₹1.14 - 1.16 crore ₹82 - 88 lakh
    Weight
    36600 Kg 33600 Kg
    Bucket
    1.5 - 2.1 m³ 1.9 m³
    Max Digging Depth
    6927 mm 6825 mm
    Engine
    Isuzu 259 HP Cummins 227 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    6400 mm 6200 mm
    Quick Overview:

    The XCMG XE380C GM is a 36-ton excavator designed for heavy construction, quarrying, mining, and large-scale earthmoving tasks that require maximum power and high productivity. An Isuzu AA-6HK1XQP 6-cylinder turbocharged diesel engine with a rating of 259 HP drives the machine, providing solid torque and reliable performance under heavy workloads and long operating hours. Weighing about 36,600 kg, the XE380C GM from XCMG Construction Equipment offers a stable and balanced platform for deep excavation and high-volume material handling on tough terrain. Its bucket capacity of 1.5 to 2.1 m³ allows for quick and efficient processing of large amounts of soil, rock, and aggregate during every working cycle. With a maximum digging depth of 6,927 mm and a maximum digging reach of around 10,470 mm, it excels in deep pit work, quarry benching, and wide-area excavation tasks. An intelligent hydraulic system with dual variable-displacement axial piston pumps and multiple working modes balances performance and fuel efficiency for high-output operation. The ROPS/FOPS-certified air-conditioned cabin offers 360° visibility and a 7″ instrument cluster, ensuring safe, comfortable, and informed operation throughout the day. The XCMG XE380C GM price in India ranges from Rs. 1.1 to 1.2 crore. This XCMG excavator is a powerful asset for mining companies, large quarry operators, and heavy civil contractors who need maximum digging power and dependable high-volume output from their equipment.

    A large excavator built for demanding tasks, Liugong 935E HD  from Liugong Construction Equipment ensures maximum durability and efficiency for heavy construction projects.

    XCMG XE380C GM Vs Liugong 935E HD Excavator Key Highlights

    XCMG XE380C GM Liugong 935E HD
    Engine Make Isuzu AA-6HK1XQP Cummins QSB7
    Fuel Tank 630 L 520 L
    Engine Displacment 7.79 L 6.7 L
    Under Carriage 5035 mm 4944 mm
    Hydraulic System 430 L 360 L
    Arm 2670 mm 2600 mm
    Max Digging Reach 10470 mm 10250 mm
    Fuel Consumption NA NA
    Overall Width 3190 mm 3190 mm
    Overall Length 11386 mm 10650 mm
    Bucket Digging Force NA 187 kN
    Tailswing Radius 3570 mm 3400 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Standard Not Available
    GPS Not Available Not Availabe

    XCMG XE380C GM Vs Liugong 935E HD Excavator Key Highlights

    XCMG XE380C GM Liugong 935E HD
    Engine Make
    Isuzu AA-6HK1XQP Cummins QSB7
    Fuel Tank
    630 L 520 L
    Engine Displacment
    7.79 L 6.7 L
    Under Carriage
    5035 mm 4944 mm
    Hydraulic System
    430 L 360 L
    Arm
    2670 mm 2600 mm
    Max Digging Reach
    10470 mm 10250 mm
    Fuel Consumption
    NA NA
    Overall Width
    3190 mm 3190 mm
    Overall Length
    11386 mm 10650 mm
    Bucket Digging Force
    NA 187 kN
    Tailswing Radius
    3570 mm 3400 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Standard Not Available
    GPS
    Not Available Not Availabe

    XCMG XE380C GM Vs Liugong 935E HD Excavator Specifications

    Engine

    3670 8867
    Model Isuzu 259 HP Cummins 227 HP
    Fuel Diesel Diesel
    Type 6 Cylinder. Turbocharged , Air to air intercooler 6 Cylinders
    Rated Engine Power 259 HP (193.1 kW) @ 2200 rpm 227 HP (169 kW) @ 2050 rpm
    Maximum Torque 873 Nm @ 1700 rpm 895 Nm @1300 rpm
    Piston Displacement 7.79 L 6.7 L
    Alternator NA NA
    Battery 12 V x 2 NA
    Starting Motor NA NA

    Undercarriage

    NA NA
    No of Top rollers 2 2
    No of bottom rollers 9 9
    Track Shoes (Each Side) 49 49
    Track Guard NA NA
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure NA 61.5 kPa
    Track Tensioning Grease Grease
    Gradeability 35° 70% (35°)
    Travel Speed-Low NA 3.0 Km/h
    Travel Speed-High 5.4 Km/h 5.5 Km/h
    Max Tracking Force 285 kN 300 kN

    Hydraulic System

    XCMG XE380C GM Liugong 935E HD
    Hydraulic pump 2 Variable Displacement Axial Piston Pumps Two Variable Displacement piston pump
    Maximum Flow 2 x 320 L/min 2 x 266 L/min
    Pilot Pump 1 Gear Pump Gear Pump
    Implement Circuit 34.3 MPa / 37 MPa 37.3 MPa
    Swing Circuit 28 MPa 26.2 MPa
    Travel circuit 34.3 MPa 34.3 MPa
    Pilot circuit 3.9 MPa 3.9 MPa

    Hydraulic Motors

    XCMG XE380C GM Liugong 935E HD
    Travel NA Axial Piston Motor
    Swing NA Axial Piston Motor

    Service Capacities

    XCMG XE380C GM Liugong 935E HD
    Fuel tank 630 L 520 L
    Engine Coolant 23 L 35 L
    Engine oil 30 L 23 L
    Hydraulic system 430 L 360 L
    Hydraulic tank 320 L 195 L

    Machine Weight

    XCMG XE380C GM Liugong 935E HD
    Operating Weight 36600 Kg 33600 Kg

    Working Range

    XCMG XE380C GM Liugong 935E HD
    Boom length 6400 mm 6200 mm
    Arm length 2670 mm 2600 mm
    Max Digging Reach 10470 mm 10250 mm
    Max Digging Reach on ground NA 10032 mm
    Max digging depth 6927 mm 6825 mm
    Max digging height 10123 mm 10007 mm
    Max Dump Height 6947 mm 7086 mm
    Max vertical wallcut depth 5312 mm 5460 mm
    Min swing radius 4424 mm 4040 mm
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force NA 187 kN
    Arm Digging Force NA 152 kN
    Swing Speed 9.7 rpm 10.3 rpm

    Dozer Blade

    XCMG XE380C GM Liugong 935E HD
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    XCMG XE380C GM Liugong 935E HD
    Bucket Capacity 1.5 - 2.1 m³ 1.9 m³

    Static Dimensions

    XCMG XE380C GM Liugong 935E HD
    Overall Length 11386 mm 10650 mm
    Overall width 3190 mm 3190 mm
    Overall Height 3530 mm 3800 mm
    Overall Height of Cab NA 3175 mm
    Upper Width 2950 mm 3163 mm
    Track Lengh on Ground 4040 mm 4050 mm
    Undercarriage overall length 5035 mm 4944 mm
    Tailswing radius 3570 mm 3400 mm
    Min Ground clearance 500 mm 450 mm
    Track gauge 2590 mm 2590 mm
    Width over tracks 3190 mm 3190 mm
    Track Height 1105 mm NA
    Counterweight Clearance 1197 mm 1172 mm
    Track Shoe Width 600 mm 600 mm

    XCMG XE380C GM Vs Liugong 935E HD Excavator Specifications

    Engine

    XCMG XE380C GM Liugong 935E HD
    Model
    Isuzu 259 HP Cummins 227 HP
    Fuel
    Diesel Diesel
    Type
    6 Cylinder. Turbocharged , Air to air intercooler 6 Cylinders
    Rated Engine Power
    259 HP (193.1 kW) @ 2200 rpm 227 HP (169 kW) @ 2050 rpm
    Maximum Torque
    873 Nm @ 1700 rpm 895 Nm @1300 rpm
    Piston Displacement
    7.79 L 6.7 L
    Alternator
    NA NA
    Battery
    12 V x 2 NA
    Starting Motor
    NA NA

    Undercarriage

    XCMG XE380C GM Liugong 935E HD
    No of Top rollers
    2 2
    No of bottom rollers
    9 9
    Track Shoes (Each Side)
    49 49
    Track Guard
    NA NA
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    NA 61.5 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    35° 70% (35°)
    Travel Speed-Low
    NA 3.0 Km/h
    Travel Speed-High
    5.4 Km/h 5.5 Km/h
    Max Tracking Force
    285 kN 300 kN

    Hydraulic Motors

    XCMG XE380C GM Liugong 935E HD
    Hydraulic pump
    2 Variable Displacement Axial Piston Pumps Two Variable Displacement piston pump
    Maximum Flow
    2 x 320 L/min 2 x 266 L/min
    Pilot Pump
    1 Gear Pump Gear Pump
    Implement Circuit
    34.3 MPa / 37 MPa 37.3 MPa
    Swing Circuit
    28 MPa 26.2 MPa
    Travel circuit
    34.3 MPa 34.3 MPa
    Pilot circuit
    3.9 MPa 3.9 MPa

    Service Capacities

    XCMG XE380C GM Liugong 935E HD
    Fuel tank
    630 L 520 L
    Engine Coolant
    23 L 35 L
    Engine oil
    30 L 23 L
    Hydraulic system
    430 L 360 L
    Hydraulic tank
    320 L 195 L

    Machine Weight

    XCMG XE380C GM Liugong 935E HD
    Operating Weight
    36600 Kg 33600 Kg

    Working Range

    XCMG XE380C GM Liugong 935E HD
    Boom length
    6400 mm 6200 mm
    Arm length
    2670 mm 2600 mm
    Max Digging Reach
    10470 mm 10250 mm
    Max Digging Reach on ground
    NA 10032 mm
    Max digging depth
    6927 mm 6825 mm
    Max digging height
    10123 mm 10007 mm
    Max Dump Height
    6947 mm 7086 mm
    Max vertical wallcut depth
    5312 mm 5460 mm
    Min swing radius
    4424 mm 4040 mm
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    NA 187 kN
    Arm Digging Force
    NA 152 kN
    Swing Speed
    9.7 rpm 10.3 rpm

    Dozer Blade

    XCMG XE380C GM Liugong 935E HD
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    XCMG XE380C GM Liugong 935E HD
    Bucket Capacity
    1.5 - 2.1 m³ 1.9 m³

    Static Dimensions

    XCMG XE380C GM Liugong 935E HD
    Overall Length
    11386 mm 10650 mm
    Overall width
    3190 mm 3190 mm
    Overall Height
    3530 mm 3800 mm
    Overall Height of Cab
    NA 3175 mm
    Upper Width
    2950 mm 3163 mm
    Track Lengh on Ground
    4040 mm 4050 mm
    Undercarriage overall length
    5035 mm 4944 mm
    Tailswing radius
    3570 mm 3400 mm
    Min Ground clearance
    500 mm 450 mm
    Track gauge
    2590 mm 2590 mm
    Width over tracks
    3190 mm 3190 mm
    Track Height
    1105 mm NA
    Counterweight Clearence
    1197 mm 1172 mm
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with XCMG XE380C GM

    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Tata Hitachi ZAXIS 370LCH Ultra
    Tata Hitachi Tata Hitachi ZAXIS 370LCH Ultra
    4.5 rating
    ₹ 1.20 - 1.30 Crore
    35700 kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    SANY SY365C-9LA Large (25-50 Ton)
    SANY SANY SY365C-9LA
    4.5 rating
    ₹1.10 - 1.20 crore
    36800 kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Tata Hitachi Tata Hitachi EX 350LC Prime
    4.5 rating
    ₹1.20 - 1.30 crore
    33800 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    LiuGong Liugong 939E HD
    4.5 rating
    ₹1.00 - 1.10 crore
    38400 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Liebherr Liebherr R 938 Litronic
    4.5 rating
    Price Available Soon
    36800 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Liebherr Liebherr R 934 Litronic
    4.5 rating
    Price Available Soon
    34150 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Liebherr Liebherr R 930 Litronic
    4.5 rating
    Price Available Soon
    30050 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    JCB JCB 345LC HD
    4.5 rating
    Price Available Soon
    34462 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Volvo Volvo EC380D
    4.5 rating
    ₹1.40 - 1.80 Crore
    37800 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Volvo Volvo EC350D
    4.5 rating
    Price Available Soon
    34300 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Tata Hitachi Tata Hitachi ZAXIS 370LCH
    4.5 rating
    ₹1.20 - 1.22 crore
    35900 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Tata Hitachi Tata Hitachi ZAXIS 400MTH
    4.5 rating
    ₹1.50 - 1.70 crore
    37600 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    SANY SANY SY390C-10HD GraMa
    4.5 rating
    ₹1.28 - 1.35 crore
    37500 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    SANY SANY SY380C-10HD
    4.5 rating
    ₹1.25 - 1.30 crore
    36000 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    SANY SANY SY350C-9LCHD
    4.5 rating
    ₹0.9 - 1.05 crore
    34300 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    LiuGong Liugong 939E
    4.5 rating
    ₹0.95 - 1.05 crore
    35800 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    L&T Komatsu Komatsu PC350LC-8M0
    4.5 rating
    ₹1.2 - 1.4 Crore
    34350 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    L&T Komatsu Komatsu PC300LC-8M0
    4.5 rating
    ₹1.1 - 1.3 Crore
    33740 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    Kobelco Kobelco SK380XDLC
    4.5 rating
    ₹1.20 - 1.30 crore
    37400 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    JCB JCB 385LC Quarry Master
    4.5 rating
    ₹1.25 - 1.27 crore
    37733 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    JCB JCB 385LC
    4.5 rating
    ₹1.20 - 1.22 crore
    37331 Kg
    VS
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    JCB JCB 315LC HD
    4.5 rating
    ₹1.10 - 1.12 crore
    34462 Kg

    Popular Comparisons with Liugong 935E HD

    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Tata Hitachi ZAXIS 370LCH Ultra
    Tata Hitachi Tata Hitachi ZAXIS 370LCH Ultra
    4.5 rating
    ₹ 1.20 - 1.30 Crore
    35700 kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    SANY SY365C-9LA Large (25-50 Ton)
    SANY SANY SY365C-9LA
    4.5 rating
    ₹1.10 - 1.20 crore
    36800 kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Tata Hitachi Tata Hitachi EX 350LC Prime
    4.5 rating
    ₹1.20 - 1.30 crore
    33800 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    LiuGong Liugong 939E HD
    4.5 rating
    ₹1.00 - 1.10 crore
    38400 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Liebherr Liebherr R 938 Litronic
    4.5 rating
    Price Available Soon
    36800 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Liebherr Liebherr R 934 Litronic
    4.5 rating
    Price Available Soon
    34150 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Liebherr Liebherr R 930 Litronic
    4.5 rating
    Price Available Soon
    30050 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Liebherr Liebherr R 928 Litronic
    4.5 rating
    Price Available Soon
    28750 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    JCB JCB 345LC HD
    4.5 rating
    Price Available Soon
    34462 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    XCMG XCMG XE380C GM
    4.5 rating
    ₹1.14 - 1.16 crore
    36600 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Volvo Volvo EC380D
    4.5 rating
    ₹1.40 - 1.80 Crore
    37800 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Volvo Volvo EC350D
    4.5 rating
    Price Available Soon
    34300 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Volvo Volvo EC300D
    4.5 rating
    ₹1.20 - 1.40 Crore
    27700 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Tata Hitachi Tata Hitachi ZAXIS 370LCH
    4.5 rating
    ₹1.20 - 1.22 crore
    35900 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Tata Hitachi Tata Hitachi ZAXIS 400MTH
    4.5 rating
    ₹1.50 - 1.70 crore
    37600 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    SANY SANY SY390C-10HD GraMa
    4.5 rating
    ₹1.28 - 1.35 crore
    37500 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    SANY SANY SY380C-10HD
    4.5 rating
    ₹1.25 - 1.30 crore
    36000 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    SANY SANY SY350C-9LCHD
    4.5 rating
    ₹0.9 - 1.05 crore
    34300 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    LiuGong Liugong 939E
    4.5 rating
    ₹0.95 - 1.05 crore
    35800 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    L&T Komatsu Komatsu PC350LC-8M0
    4.5 rating
    ₹1.2 - 1.4 Crore
    34350 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    L&T Komatsu Komatsu PC300LC-8M0
    4.5 rating
    ₹1.1 - 1.3 Crore
    33740 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    Kobelco Kobelco SK380XDLC
    4.5 rating
    ₹1.20 - 1.30 crore
    37400 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    JCB JCB 385LC Quarry Master
    4.5 rating
    ₹1.25 - 1.27 crore
    37733 Kg
    VS
    LiuGong Liugong 935E HD
    4.5 rating
    ₹82 - 88 lakh
    33600 Kg
    JCB JCB 385LC
    4.5 rating
    ₹1.20 - 1.22 crore
    37331 Kg

    Frequently Asked Question

    Ans.

    The XCMG XE380C GM can dig down to about 6927 mm, nearly seven metres. This makes it well suited to deep foundation and basement digging where you need to reach far below ground level. The Liugong 935E HD is built more for stability and reach across the surface than for extreme depth.

    Ans.

    The Liugong 935E HD is better for steep or sloped sites. It has a rated gradeability of about 70 percent, which helps it climb and hold position on sloped ground like hill sites and quarries. This makes it a safer choice where the terrain is not flat.

    Ans.

    No, the Liugong 935E HD does not have an AC cabin as standard. The XCMG XE380C GM includes an AC cabin as standard, which makes long shifts more comfortable for the driver, especially in hot weather.

    Ans.

    The XCMG XE380C GM has a large 630-litre fuel tank, which means fewer refuelling stops on long shifts. The Liugong 935E HD's fuel tank size was not clearly listed, so check the latest spec sheet with your dealer if fuel range matters for your site.

    Ans.

    Both Liugong and XCMG are established Chinese brands with a growing dealer and parts network in India. Neither is as widely spread as older brands yet, so it helps to check dealer presence and parts stock in your own district before you buy either machine.

    XCMG XE380C GM Vs Liugong 935E HD - Compare Price & Availability Across 600+ Locations in India

    Compare XCMG XE380C GM Vs Liugong 935E HD price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare