Zoomlion ZD160-3 vs CASE 1650L: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 175 HP vs FPT 146 HP), Price (₹80 – 95 Lakh vs ₹90 Lakh – 1.10 Cr), Operating Weight (17,300 kg vs 17,960 kg), Weight (17300 kg vs 17960 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Zoomlion ZD160-3
CASE 1650L
Zoomlion ZD160-3
VS
CASE 1650L
Dozer
Zoomlion ZD160-3 vs CASE 1650L: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 175 HP vs FPT 146 HP), Price (₹80 – 95 Lakh vs ₹90 Lakh – 1.10 Cr), Operating Weight (17,300 kg vs 17,960 kg), Weight (17300 kg vs 17960 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Zoomlion ZD160-3
₹80 – 95 Lakh
CASE 1650L
₹90 Lakh – 1.10 Cr
Particulars
Zoomlion ZD160-3
CASE 1650L
CASE 1650L vs Zoomlion ZD160-3: Which Dozer Fits Your Work
The Zoomlion ZD160-3 carries more engine power and a bigger straight-tilt blade than the CASE 1650L, using a conventional powershift transmission with fixed gears. Yet the 1650L holds a rated drawbar pull that is roughly double the ZD160-3's, along with a lower ground bearing pressure, a standard AC cabin and an optional ripper, none of which the ZD160-3 spec sheet lists.
Choose the ZD160-3 for straightforward grading and spreading work where ripping is not a daily need. Choose the CASE 1650L when the site needs stronger pulling force, occasional ripping or a gentler footprint on softer ground. Compare more machines in our construction dozer range or the full dozer lineup.
CASE 1650L
Pros:
Much higher rated drawbar pull for pushing through compacted ground
Lower ground bearing pressure for soft ground
Standard AC cabin with an air-suspension seat
Optional ripper for occasional hard patches
Hydrostatic drive with stepless speed control
Cons:
Smaller blade capacity than the ZD160-3
Lower rated engine power
CASE dozer service network in India is smaller than Zoomlion's
Zoomlion ZD160-3
Pros:
Higher rated engine power
Bigger straight-tilt blade for more material per pass
Backed by Zoomlion's wider equipment presence in India
Straightforward conventional transmission, familiar to many mechanics
Cons:
Much lower rated drawbar pull than the CASE 1650L
No ripper option listed
No standard AC cabin listed
Higher ground bearing pressure than the CASE 1650L
Pros:
Cons:
Closing Recommendation
Engine power alone does not decide this comparison. The Zoomlion ZD160-3 has more horsepower and a bigger blade, but the CASE 1650L holds a far stronger rated drawbar pull, a gentler footprint and an optional ripper. So match the machine to your work: CASE 1650L for sites needing strong pulling force or occasional ripping, Zoomlion ZD160-3 for straightforward grading and spreading work.
Zoomlion ZD160-3 Vs CASE 1650L Dozer Price, Technical Specifications & Features
The Zoomlion ZD160-3 is a 17.3-tonne construction crawler dozer using a 175 HP engine. Its 4.5 m³ blade handles standard grading and spreading, while the 137 kN drawbar pull covers typical site-preparation work. Ground bearing pressure of 67 kPa suits regular construction ground, and rated gradeability reaches 30 degrees for sloped sites. There is no ripper option listed, so the machine remains focused on grading rather than breaking. The ZD160-3 is the smaller of Zoomlion's two listed construction dozers. The ZD220-3 moves into a higher operating weight and blade capacity for larger earthwork. Contractors who do not need that additional volume can consider the smaller model for local site work. A 295-litre fuel tank supports full-shift operation, while ground clearance is 400 mm. Road-base preparation, site clearing and general grading are suitable applications. The Zoomlion ZD160-3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental fleets can consider this dozer machine for regular construction jobs where ripping is not a daily requirement. Its operating weight remains manageable for standard sites. Buyers can compare the blade volume against expected daily work before moving to the ZD220-3. The ZD160-3 provides a practical construction crawler dozer for contractors focused on controlled grading and material spreading.
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
Agency review
Planning to buy the Zoomlion ZD160-3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the CASE 1650L Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 1650L vs Zoomlion ZD160-3: Which Dozer Fits Your Work
The Zoomlion ZD160-3 carries more engine power and a bigger straight-tilt blade than the CASE 1650L, using a conventional powershift transmission with fixed gears. Yet the 1650L holds a rated drawbar pull that is roughly double the ZD160-3's, along with a lower ground bearing pressure, a standard AC cabin and an optional ripper, none of which the ZD160-3 spec sheet lists.
Choose the ZD160-3 for straightforward grading and spreading work where ripping is not a daily need. Choose the CASE 1650L when the site needs stronger pulling force, occasional ripping or a gentler footprint on softer ground. Compare more machines in our construction dozer range or the full dozer lineup.
CASE 1650L
Pros:
Much higher rated drawbar pull for pushing through compacted ground
Lower ground bearing pressure for soft ground
Standard AC cabin with an air-suspension seat
Optional ripper for occasional hard patches
Hydrostatic drive with stepless speed control
Cons:
Smaller blade capacity than the ZD160-3
Lower rated engine power
CASE dozer service network in India is smaller than Zoomlion's
Zoomlion ZD160-3
Pros:
Higher rated engine power
Bigger straight-tilt blade for more material per pass
Backed by Zoomlion's wider equipment presence in India
Straightforward conventional transmission, familiar to many mechanics
Cons:
Much lower rated drawbar pull than the CASE 1650L
No ripper option listed
No standard AC cabin listed
Higher ground bearing pressure than the CASE 1650L
Pros:
Cons:
Closing Recommendation
Engine power alone does not decide this comparison. The Zoomlion ZD160-3 has more horsepower and a bigger blade, but the CASE 1650L holds a far stronger rated drawbar pull, a gentler footprint and an optional ripper. So match the machine to your work: CASE 1650L for sites needing strong pulling force or occasional ripping, Zoomlion ZD160-3 for straightforward grading and spreading work.
Zoomlion ZD160-3 Vs CASE 1650L Dozer Price, Technical Specifications & Features
The Zoomlion ZD160-3 is a 17.3-tonne construction crawler dozer using a 175 HP engine. Its 4.5 m³ blade handles standard grading and spreading, while the 137 kN drawbar pull covers typical site-preparation work. Ground bearing pressure of 67 kPa suits regular construction ground, and rated gradeability reaches 30 degrees for sloped sites. There is no ripper option listed, so the machine remains focused on grading rather than breaking. The ZD160-3 is the smaller of Zoomlion's two listed construction dozers. The ZD220-3 moves into a higher operating weight and blade capacity for larger earthwork. Contractors who do not need that additional volume can consider the smaller model for local site work. A 295-litre fuel tank supports full-shift operation, while ground clearance is 400 mm. Road-base preparation, site clearing and general grading are suitable applications. The Zoomlion ZD160-3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental fleets can consider this dozer machine for regular construction jobs where ripping is not a daily requirement. Its operating weight remains manageable for standard sites. Buyers can compare the blade volume against expected daily work before moving to the ZD220-3. The ZD160-3 provides a practical construction crawler dozer for contractors focused on controlled grading and material spreading.
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
67 differ · 10 identical
Key highlights: Zoomlion ZD160-3 vs CASE 1650L Dozer
Zoomlion ZD160-3
CASE 1650L
Engine Make
Weichai WD10G178E25
FPT Industrial F4HE9684U
Rated Engine Power
129-131 kW (175 HP) @ 1850 rpm
107 kW (146 HP) @ 2200 rpm
Maximum Torque
830 Nm @ 1200-1300 rpm
690 Nm @ 1400 rpm
Max Forward Speed
11.2 km/h
9.7 km/h
Max Drawbar Pull
137 kN
275 kN
Fuel Tank
NA
300 L
Overall Width
3416 mm
3200 mm
Track Shoe Width
510 mm
559 mm
Ground Bearing Pressure
67 kPa
46.1 kPa
Blade Options
Straight tilt (std)
PAT std
Ripper
NA
3-shank ripper optional (1600 kg); penetration 478 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Key highlights: Zoomlion ZD160-3 vs CASE 1650L Dozer
Zoomlion ZD160-3
CASE 1650L
Engine Make
Weichai WD10G178E25
FPT Industrial F4HE9684U
Rated Engine Power
129-131 kW (175 HP) @ 1850 rpm
107 kW (146 HP) @ 2200 rpm
Maximum Torque
830 Nm @ 1200-1300 rpm
690 Nm @ 1400 rpm
Max Forward Speed
11.2 km/h
9.7 km/h
Max Drawbar Pull
137 kN
275 kN
Fuel Tank
NA
300 L
Overall Width
3416 mm
3200 mm
Track Shoe Width
510 mm
559 mm
Ground Bearing Pressure
67 kPa
46.1 kPa
Blade Options
Straight tilt (std)
PAT std
Ripper
NA
3-shank ripper optional (1600 kg); penetration 478 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Full specifications: Zoomlion ZD160-3 vs CASE 1650L Dozer
Engine
26816
26813
Model
Weichai WD10G178E25
FPT Industrial F4HE9684U
Fuel
Diesel
Diesel
Type
4-stroke, water-cooled, turbocharged, direct injection
Questions buyers ask about the Zoomlion ZD160-3 vs CASE 1650L
Ans.
The CASE 1650L does, by a wide margin. This means it can push through more resistant, compacted ground than the ZD160-3's rated figure suggests it can handle.
Ans.
The Zoomlion ZD160-3 does, along with a bigger straight-tilt blade for moving more material per pass.
Ans.
No, the spec sheet does not list one. The CASE 1650L offers an optional 3-shank ripper for occasional hard ground.
Ans.
The CASE 1650L is. Its ground bearing pressure is lower than the ZD160-3's, so it spreads its weight better on loose or freshly worked fill.
Ans.
No, the spec sheet does not list one as standard. The CASE 1650L comes with a standard AC cabin and an air-suspension seat.
Ans.
The CASE 1650L does, giving stepless speed control. The Zoomlion ZD160-3 uses a conventional powershift transmission with a torque converter and fixed gears.
Zoomlion ZD160-3 Vs CASE 1650L - Compare Price & Availability Across 600+ Locations in India
Compare Zoomlion ZD160-3 Vs CASE 1650L price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
