Shantui DH17B3 vs LiuGong B160C: the two differ on 61 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Weichai 163 HP), Price (₹80 – 95 Lakh vs ₹75 – 90 Lakh), Operating Weight (17,730 kg vs 17,000 kg), Weight (17730 kg vs 17000 kg). The other 16 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH17B3
LiuGong B160C
Shantui DH17B3
VS
LiuGong B160C
Dozer
Shantui DH17B3 vs LiuGong B160C: the two differ on 61 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Weichai 163 HP), Price (₹80 – 95 Lakh vs ₹75 – 90 Lakh), Operating Weight (17,730 kg vs 17,000 kg), Weight (17730 kg vs 17000 kg). The other 16 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH17B3
₹80 – 95 Lakh
LiuGong B160C
₹75 – 90 Lakh
Particulars
Shantui DH17B3
LiuGong B160C
LiuGong B160C vs Shantui DH17B3: conventional dozer or hydrostatic bulk-pusher?
The LiuGong B160C runs a conventional powershift driveline at 163 HP with a 4.5 m³ straight blade. The Shantui DH17B3 uses the same hydrostatic platform as its DH16B3 sibling but fits a semi-U blade instead, at 4.7 m³, trading grading versatility for carry capacity per pass. The DH17B3 is also rated for 288.8 kN of drawbar pull and sinks less on soft ground, based on its lower ground bearing pressure than the B160C.
Both are construction dozers in the same power class. Pick the B160C for straightforward pushing where a simple driveline is enough. Pick the DH17B3 for stockpile work and bulk earthmoving where hydrostatic control and carry capacity matter, backed by Shantui's wide Indian parts network. See the full dozer range or the bulldozer guide for more help choosing.
LiuGong B160C
Pros:
Simple conventional powershift driveline, familiar to most local mechanics
Wider overall width than the DH17B3
Straightforward setup suited to general pushing and spreading
Weichai engine parts are widely available across Indian equipment markets
Cons:
Less powerful at 163 HP against the DH17B3's 170 HP
Slightly smaller blade at 4.5 m³ against the DH17B3's 4.7 m³
No drawbar pull figure listed, unlike the DH17B3's stated 288.8 kN
Higher ground bearing pressure than the DH17B3, sinks more on soft ground
Shantui DH17B3
Pros:
More powerful at 170 HP with higher maximum torque than the B160C
Slightly bigger 4.7 m³ semi-U blade carries more material per pass
Full hydrostatic drive keeps power available through turns
Rated for 288.8 kN of drawbar pull
Lower ground bearing pressure, sinks less on soft ground than the B160C
Cons:
Heavier at 17,730 kg than the B160C
Semi-U blade is built for carry capacity, not fine finish grading
Needs trained service and genuine parts to keep the hydrostatic drive running well
Fuel tank capacity is only marginally bigger than the B160C's despite the added drive complexity
Pros:
Cons:
Closing Recommendation
The LiuGong B160C keeps things simple with a conventional driveline that is easy to service anywhere, which suits straightforward pushing and spreading work. The Shantui DH17B3 adds more power, a rated drawbar pull figure and a semi-U blade that carries more material per pass, and it sinks less on soft ground. So match the machine to your work: LiuGong B160C for straightforward pushing and general earthwork, Shantui DH17B3 for stockpile work and bulk earthmoving that rewards carry capacity.
Shantui DH17B3 Vs LiuGong B160C Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
The LiuGong B160C is a 17-tonne construction crawler dozer with a 163 HP engine and a 4.5 m³ blade. Its blade capacity gives it useful material-moving ability for the operating weight. There is no ripper listed, so the machine remains focused on pushing, grading and spreading. Ground bearing pressure of 67 kPa makes reasonably settled ground a better fit than fresh soft fill. The B160C is the smaller of LiuGong's two listed dozers, with the B230 providing considerably more blade capacity. Contractors working on smaller sites can therefore avoid carrying the extra size of the larger machine. Land clearing ahead of construction and rough site grading are suitable applications. The LiuGong B160C bulldozer price is ₹75 lakh to ₹90 lakh. A contractor preparing plots before larger equipment arrives can use the dozer machine for regular material movement. Its straightforward setup suits buyers who do not require ripping as part of daily work. The 4.5 m³ blade provides useful output without moving into the heavier construction class. Buyers can consider it for local civil work, land clearing and general site preparation. Its operating weight also keeps it suitable for projects where larger crawler dozers would be unnecessary. The B160C is a practical option for straightforward construction earthwork.
Agency review
Planning to buy the Shantui DH17B3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the LiuGong B160C Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
LiuGong B160C vs Shantui DH17B3: conventional dozer or hydrostatic bulk-pusher?
The LiuGong B160C runs a conventional powershift driveline at 163 HP with a 4.5 m³ straight blade. The Shantui DH17B3 uses the same hydrostatic platform as its DH16B3 sibling but fits a semi-U blade instead, at 4.7 m³, trading grading versatility for carry capacity per pass. The DH17B3 is also rated for 288.8 kN of drawbar pull and sinks less on soft ground, based on its lower ground bearing pressure than the B160C.
Both are construction dozers in the same power class. Pick the B160C for straightforward pushing where a simple driveline is enough. Pick the DH17B3 for stockpile work and bulk earthmoving where hydrostatic control and carry capacity matter, backed by Shantui's wide Indian parts network. See the full dozer range or the bulldozer guide for more help choosing.
LiuGong B160C
Pros:
Simple conventional powershift driveline, familiar to most local mechanics
Wider overall width than the DH17B3
Straightforward setup suited to general pushing and spreading
Weichai engine parts are widely available across Indian equipment markets
Cons:
Less powerful at 163 HP against the DH17B3's 170 HP
Slightly smaller blade at 4.5 m³ against the DH17B3's 4.7 m³
No drawbar pull figure listed, unlike the DH17B3's stated 288.8 kN
Higher ground bearing pressure than the DH17B3, sinks more on soft ground
Shantui DH17B3
Pros:
More powerful at 170 HP with higher maximum torque than the B160C
Slightly bigger 4.7 m³ semi-U blade carries more material per pass
Full hydrostatic drive keeps power available through turns
Rated for 288.8 kN of drawbar pull
Lower ground bearing pressure, sinks less on soft ground than the B160C
Cons:
Heavier at 17,730 kg than the B160C
Semi-U blade is built for carry capacity, not fine finish grading
Needs trained service and genuine parts to keep the hydrostatic drive running well
Fuel tank capacity is only marginally bigger than the B160C's despite the added drive complexity
Pros:
Cons:
Closing Recommendation
The LiuGong B160C keeps things simple with a conventional driveline that is easy to service anywhere, which suits straightforward pushing and spreading work. The Shantui DH17B3 adds more power, a rated drawbar pull figure and a semi-U blade that carries more material per pass, and it sinks less on soft ground. So match the machine to your work: LiuGong B160C for straightforward pushing and general earthwork, Shantui DH17B3 for stockpile work and bulk earthmoving that rewards carry capacity.
Shantui DH17B3 Vs LiuGong B160C Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
The LiuGong B160C is a 17-tonne construction crawler dozer with a 163 HP engine and a 4.5 m³ blade. Its blade capacity gives it useful material-moving ability for the operating weight. There is no ripper listed, so the machine remains focused on pushing, grading and spreading. Ground bearing pressure of 67 kPa makes reasonably settled ground a better fit than fresh soft fill. The B160C is the smaller of LiuGong's two listed dozers, with the B230 providing considerably more blade capacity. Contractors working on smaller sites can therefore avoid carrying the extra size of the larger machine. Land clearing ahead of construction and rough site grading are suitable applications. The LiuGong B160C bulldozer price is ₹75 lakh to ₹90 lakh. A contractor preparing plots before larger equipment arrives can use the dozer machine for regular material movement. Its straightforward setup suits buyers who do not require ripping as part of daily work. The 4.5 m³ blade provides useful output without moving into the heavier construction class. Buyers can consider it for local civil work, land clearing and general site preparation. Its operating weight also keeps it suitable for projects where larger crawler dozers would be unnecessary. The B160C is a practical option for straightforward construction earthwork.
61 differ · 16 identical
Key highlights: Shantui DH17B3 vs LiuGong B160C Dozer
Shantui DH17B3
LiuGong B160C
Engine Make
Weichai WD10G190E214
Weichai WD10G178E25
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
120 kW (163 HP) @ 1850 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
830 Nm
Max Forward Speed
10 (0-10) km/h
10.6 km/h
Max Drawbar Pull
288.8 kN
NA
Fuel Tank
352 L
350 L
Overall Width
3400 mm
3422 mm
Track Shoe Width
510 mm
510 mm
Ground Bearing Pressure
65 kPa
67 kPa
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
Straight (referenced)
Ripper
Optional
NA
AC Cabin
NA
NA
Warranty
12 Months
12 months / 2000 hrs
Key highlights: Shantui DH17B3 vs LiuGong B160C Dozer
Shantui DH17B3
LiuGong B160C
Engine Make
Weichai WD10G190E214
Weichai WD10G178E25
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
120 kW (163 HP) @ 1850 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
830 Nm
Max Forward Speed
10 (0-10) km/h
10.6 km/h
Max Drawbar Pull
288.8 kN
NA
Fuel Tank
352 L
350 L
Overall Width
3400 mm
3422 mm
Track Shoe Width
510 mm
510 mm
Ground Bearing Pressure
65 kPa
67 kPa
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
Straight (referenced)
Ripper
Optional
NA
AC Cabin
NA
NA
Warranty
12 Months
12 months / 2000 hrs
Full specifications: Shantui DH17B3 vs LiuGong B160C Dozer
Engine
26830
26814
Model
Weichai WD10G190E214
Weichai WD10G178E25
Fuel
Diesel
Diesel
Type
NA
4-stroke, water-cooled, turbocharged, direct injection
Questions buyers ask about the Shantui DH17B3 vs LiuGong B160C
Ans.
The Shantui DH17B3 is more powerful. It runs at 170 HP against the B160C's 163 HP, with higher maximum torque as well. It is also the slightly heavier machine of the two, which fits its role as a bulk-pushing dozer.
Ans.
The Shantui DH17B3 has a slightly bigger blade, at 4.7 m³ against the B160C's 4.5 m³. Its semi-U shape is built to carry more material per pass rather than for fine grading, which suits stockpile and bulk earthmoving work well.
Ans.
The Shantui DH17B3 sinks less. Its ground bearing pressure is lower than the B160C's, which helps when pushing over loose fill or freshly turned soil where a heavier footprint could get stuck and slow the whole day's work down badly.
Ans.
Yes, the DH17B3 is rated at 288.8 kN of drawbar pull. The LiuGong B160C does not list a drawbar pull figure, so this is one of the clearer performance numbers separating the two machines when you compare them on paper.
Ans.
Not as well. The DH17B3 fits a semi-U blade instead of the DH16B3's adjustable PAT blade, so it is built more for moving bulk volume than for finish grading in tight corners or along the edges of a busy site.
Ans.
The LiuGong B160C is simpler to service. Its conventional powershift driveline is familiar to most local mechanics, while the DH17B3's hydrostatic drive needs trained service and genuine parts to stay reliable over its full working life on any construction site.
Shantui DH17B3 Vs LiuGong B160C - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH17B3 Vs LiuGong B160C price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
