Shantui DH17B3 vs CASE 2050M: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs FPT 218 HP), Price (₹80 – 95 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,730 kg vs 20,592 kg), Weight (17730 kg vs 20592 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH17B3
CASE 2050M
Shantui DH17B3
VS
CASE 2050M
Dozer
Shantui DH17B3 vs CASE 2050M: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs FPT 218 HP), Price (₹80 – 95 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,730 kg vs 20,592 kg), Weight (17730 kg vs 20592 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH17B3
₹80 – 95 Lakh
CASE 2050M
₹1.10 – 1.30 Cr
Particulars
Shantui DH17B3
CASE 2050M
CASE 2050M vs Shantui DH17B3: which construction dozer fits your site?
The CASE 2050M is the bigger machine across the board, at 218 HP against the Shantui DH17B3's 170 HP, with a 5.6 m³ blade against 4.7 m³ and a drawbar pull of 360 kN against 288.8 kN. It also carries more fuel, at 405 litres against 352 litres, and sinks less on soft ground, since its ground bearing pressure is lower. The DH17B3 is the lighter machine and adds alternate blade options, including a 6.2 m³ coal blade and a 3.6 m³ straight-tilt blade, for jobs that need a different edge.
Pick by the scale of the work. For bigger cuts and steady production where more power, torque and blade volume matter, the CASE 2050M is the stronger machine. For lighter grading jobs, or work where a coal or straight-tilt blade fits better, the Shantui DH17B3 is a lighter, more flexible option without paying for capacity you will not use. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Stronger engine at 218 HP against the DH17B3's 170 HP
More torque at 1,082 Nm against the DH17B3's 900 Nm
Bigger blade at 5.6 m³ against the DH17B3's 4.7 m³, so it moves more material per pass
Higher drawbar pull at 360 kN against the DH17B3's 288.8 kN
Bigger fuel tank at 405 L against the DH17B3's 352 L
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the DH17B3's 65 kPa
Cons:
Heavier at 20,592 kg, which needs a bigger trailer to move than the DH17B3's 17,730 kg
Blade options are limited to semi-U and PAT; the DH17B3 also offers a coal blade and a straight-tilt blade for specialised jobs
Bigger engine than lighter grading work may actually need, compared to the DH17B3's smaller 170 HP unit
Shantui DH17B3
Pros:
Lighter at 17,730 kg, which can make it easier to trailer and move between sites
Offers alternate blade options, including a 6.2 m³ coal blade and a 3.6 m³ straight-tilt blade, for different jobs
Smaller 170 HP engine suits lighter grading work without paying for capacity you will not use
Cons:
Less powerful at 170 HP against the CASE 2050M's 218 HP
Smaller blade at 4.7 m³ against the 2050M's 5.6 m³, so it moves less material per pass
Lower drawbar pull at 288.8 kN against the 2050M's 360 kN
Sinks more on soft ground, with ground bearing pressure at 65 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
These two are built for different scales of work. The CASE 2050M pushes harder, pulls harder and carries more material per pass, which suits bigger cuts and steady production. The Shantui DH17B3 is lighter and offers extra blade choices, including a coal blade, which suits lighter grading or specialised jobs. So match the machine to your work: CASE 2050M for bigger cuts and heavy pushing, Shantui DH17B3 for lighter grading or coal-blade work on smaller sites.
Shantui DH17B3 Vs CASE 2050M Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
Agency review
Planning to buy the Shantui DH17B3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the CASE 2050M Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 2050M vs Shantui DH17B3: which construction dozer fits your site?
The CASE 2050M is the bigger machine across the board, at 218 HP against the Shantui DH17B3's 170 HP, with a 5.6 m³ blade against 4.7 m³ and a drawbar pull of 360 kN against 288.8 kN. It also carries more fuel, at 405 litres against 352 litres, and sinks less on soft ground, since its ground bearing pressure is lower. The DH17B3 is the lighter machine and adds alternate blade options, including a 6.2 m³ coal blade and a 3.6 m³ straight-tilt blade, for jobs that need a different edge.
Pick by the scale of the work. For bigger cuts and steady production where more power, torque and blade volume matter, the CASE 2050M is the stronger machine. For lighter grading jobs, or work where a coal or straight-tilt blade fits better, the Shantui DH17B3 is a lighter, more flexible option without paying for capacity you will not use. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Stronger engine at 218 HP against the DH17B3's 170 HP
More torque at 1,082 Nm against the DH17B3's 900 Nm
Bigger blade at 5.6 m³ against the DH17B3's 4.7 m³, so it moves more material per pass
Higher drawbar pull at 360 kN against the DH17B3's 288.8 kN
Bigger fuel tank at 405 L against the DH17B3's 352 L
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the DH17B3's 65 kPa
Cons:
Heavier at 20,592 kg, which needs a bigger trailer to move than the DH17B3's 17,730 kg
Blade options are limited to semi-U and PAT; the DH17B3 also offers a coal blade and a straight-tilt blade for specialised jobs
Bigger engine than lighter grading work may actually need, compared to the DH17B3's smaller 170 HP unit
Shantui DH17B3
Pros:
Lighter at 17,730 kg, which can make it easier to trailer and move between sites
Offers alternate blade options, including a 6.2 m³ coal blade and a 3.6 m³ straight-tilt blade, for different jobs
Smaller 170 HP engine suits lighter grading work without paying for capacity you will not use
Cons:
Less powerful at 170 HP against the CASE 2050M's 218 HP
Smaller blade at 4.7 m³ against the 2050M's 5.6 m³, so it moves less material per pass
Lower drawbar pull at 288.8 kN against the 2050M's 360 kN
Sinks more on soft ground, with ground bearing pressure at 65 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
These two are built for different scales of work. The CASE 2050M pushes harder, pulls harder and carries more material per pass, which suits bigger cuts and steady production. The Shantui DH17B3 is lighter and offers extra blade choices, including a coal blade, which suits lighter grading or specialised jobs. So match the machine to your work: CASE 2050M for bigger cuts and heavy pushing, Shantui DH17B3 for lighter grading or coal-blade work on smaller sites.
Shantui DH17B3 Vs CASE 2050M Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
67 differ · 10 identical
Key highlights: Shantui DH17B3 vs CASE 2050M Dozer
Shantui DH17B3
CASE 2050M
Engine Make
Weichai WD10G190E214
FPT Industria F4HE96848
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
160 kW (218 HP) @ 2200 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
1082 Nm @ 1500 rpm
Max Forward Speed
10 (0-10) km/h
9.3 (0-9.3) km/h
Max Drawbar Pull
288.8 kN
360 kN
Fuel Tank
352 L
405 L
Overall Width
3400 mm
3426 mm
Track Shoe Width
510 mm
610 mm
Ground Bearing Pressure
65 kPa
50.0 kPa (operating, 610 mm shoes)
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Ripper
Optional
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
AC Cabin
NA
Standard
Warranty
12 Months
12 Months
Key highlights: Shantui DH17B3 vs CASE 2050M Dozer
Shantui DH17B3
CASE 2050M
Engine Make
Weichai WD10G190E214
FPT Industria F4HE96848
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
160 kW (218 HP) @ 2200 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
1082 Nm @ 1500 rpm
Max Forward Speed
10 (0-10) km/h
9.3 (0-9.3) km/h
Max Drawbar Pull
288.8 kN
360 kN
Fuel Tank
352 L
405 L
Overall Width
3400 mm
3426 mm
Track Shoe Width
510 mm
610 mm
Ground Bearing Pressure
65 kPa
50.0 kPa (operating, 610 mm shoes)
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Ripper
Optional
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
AC Cabin
NA
Standard
Warranty
12 Months
12 Months
Full specifications: Shantui DH17B3 vs CASE 2050M Dozer
Engine
26830
26827
Model
Weichai WD10G190E214
FPT Industria F4HE96848 (NEF family)l
Fuel
Diesel
Diesel
Type
NA
Direct common rail; turbocharged, air-to-air intercooled
Questions buyers ask about the Shantui DH17B3 vs CASE 2050M
Ans.
The CASE 2050M is more powerful. It has 218 HP against the DH17B3's 170 HP, and its maximum torque is also higher at 1,082 Nm against 900 Nm. That extra power helps the 2050M push through denser material.
Ans.
The CASE 2050M has the bigger blade, at 5.6 m³ against the Shantui DH17B3's 4.7 m³. So the 2050M carries more material in each pass.
Ans.
The CASE 2050M pulls harder. Its drawbar pull is 360 kN against the Shantui DH17B3's 288.8 kN, which helps it pull through tough, sticky ground.
Ans.
The CASE 2050M has the bigger fuel tank, at 405 litres against the Shantui DH17B3's 352 litres. That lets the 2050M run longer between fill-ups on a full working day.
Ans.
The CASE 2050M is easier on soft ground. Its ground bearing pressure is 50.0 kPa against the Shantui DH17B3's 65 kPa, so the 2050M spreads its weight over more track area and sinks less.
Shantui DH17B3 Vs CASE 2050M - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH17B3 Vs CASE 2050M price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
