Shantui DH17B3 vs SEM 818F: the two differ on 63 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Weichai 188 HP), Price (₹80 – 95 Lakh vs ₹70 – 85 Lakh), Operating Weight (17,730 kg vs 16,950 kg), Weight (17730 kg vs 16950 kg). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH17B3
SEM 818F
Shantui DH17B3
VS
SEM 818F
Dozer
Shantui DH17B3 vs SEM 818F: the two differ on 63 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Weichai 188 HP), Price (₹80 – 95 Lakh vs ₹70 – 85 Lakh), Operating Weight (17,730 kg vs 16,950 kg), Weight (17730 kg vs 16950 kg). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH17B3
₹80 – 95 Lakh
SEM 818F
₹70 – 85 Lakh
Particulars
Shantui DH17B3
SEM 818F
SEM 818F vs Shantui DH17B3: which construction dozer fits your work?
The SEM 818F has more engine power than the Shantui DH17B3, and it also carries a bigger fuel tank, so it can run longer between refuelling stops. Its ground bearing pressure is lower too, which means it sinks less on freshly worked or soft ground. A multi-shank ripper comes built in as standard on the 818F, ready the day the ground gets hard. The DH17B3 answers back with a bigger blade, at 4.7 cubic metres against 4.3 cubic metres, and it digs deeper below ground level with that blade, plus a little more ground clearance for crossing rough patches.
Both sit in the construction dozer class, so this comes down to fuel range, ground softness and blade volume rather than raw size. Sites where fuel stops are far away or the ground is soft and freshly filled suit the 818F better. Sites that need a bigger blade for stockpile or spreading work, with an optional ripper only when needed, suit the DH17B3. Check the full dozer lineup or the bulldozer guide before choosing between the two.
SEM 818F
Pros:
More engine power at 188 HP
Bigger fuel tank for longer runs between refuelling
Lower ground bearing pressure, sinks less on soft ground
Ripper comes built in as standard for harder ground
Tighter turning radius than the DH17B3
Cons:
Smaller blade at 4.3 cubic metres against 4.7 on the DH17B3
Blade does not drop as deep below ground level
Slightly less ground clearance than the DH17B3
Shantui DH17B3
Pros:
Bigger blade at 4.7 cubic metres, moves more material per pass
Drawbar pull rated at close to 289 kN for pushing through fill
Ripper available as an option when the ground needs it
Cons:
Less engine power at 170 HP
Smaller fuel tank than the SEM 818F
Higher ground bearing pressure, sinks more on soft ground
Heavier machine and a wider turning radius than the SEM 818F
Pros:
Cons:
Closing Recommendation
These two construction dozers are close in size but pull in slightly different directions. The SEM 818F gives you more engine power, a bigger fuel tank and a built-in ripper, plus lower ground pressure for softer sites. The Shantui DH17B3 answers with a bigger blade and a deeper below-ground reach, useful when you need to move more material per pass or dig out low ground. Neither wins on every point, so weigh your typical ground and blade needs before choosing. So match the machine to your work: SEM 818F for sites with soft ground, long shifts between refuelling, or unpredictable hard patches, Shantui DH17B3 for jobs that need a bigger blade and deeper digging in each pass.
Shantui DH17B3 Vs SEM 818F Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
Agency review
Planning to buy the Shantui DH17B3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the SEM 818F Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
SEM 818F vs Shantui DH17B3: which construction dozer fits your work?
The SEM 818F has more engine power than the Shantui DH17B3, and it also carries a bigger fuel tank, so it can run longer between refuelling stops. Its ground bearing pressure is lower too, which means it sinks less on freshly worked or soft ground. A multi-shank ripper comes built in as standard on the 818F, ready the day the ground gets hard. The DH17B3 answers back with a bigger blade, at 4.7 cubic metres against 4.3 cubic metres, and it digs deeper below ground level with that blade, plus a little more ground clearance for crossing rough patches.
Both sit in the construction dozer class, so this comes down to fuel range, ground softness and blade volume rather than raw size. Sites where fuel stops are far away or the ground is soft and freshly filled suit the 818F better. Sites that need a bigger blade for stockpile or spreading work, with an optional ripper only when needed, suit the DH17B3. Check the full dozer lineup or the bulldozer guide before choosing between the two.
SEM 818F
Pros:
More engine power at 188 HP
Bigger fuel tank for longer runs between refuelling
Lower ground bearing pressure, sinks less on soft ground
Ripper comes built in as standard for harder ground
Tighter turning radius than the DH17B3
Cons:
Smaller blade at 4.3 cubic metres against 4.7 on the DH17B3
Blade does not drop as deep below ground level
Slightly less ground clearance than the DH17B3
Shantui DH17B3
Pros:
Bigger blade at 4.7 cubic metres, moves more material per pass
Drawbar pull rated at close to 289 kN for pushing through fill
Ripper available as an option when the ground needs it
Cons:
Less engine power at 170 HP
Smaller fuel tank than the SEM 818F
Higher ground bearing pressure, sinks more on soft ground
Heavier machine and a wider turning radius than the SEM 818F
Pros:
Cons:
Closing Recommendation
These two construction dozers are close in size but pull in slightly different directions. The SEM 818F gives you more engine power, a bigger fuel tank and a built-in ripper, plus lower ground pressure for softer sites. The Shantui DH17B3 answers with a bigger blade and a deeper below-ground reach, useful when you need to move more material per pass or dig out low ground. Neither wins on every point, so weigh your typical ground and blade needs before choosing. So match the machine to your work: SEM 818F for sites with soft ground, long shifts between refuelling, or unpredictable hard patches, Shantui DH17B3 for jobs that need a bigger blade and deeper digging in each pass.
Shantui DH17B3 Vs SEM 818F Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
63 differ · 14 identical
Key highlights: Shantui DH17B3 vs SEM 818F Dozer
Shantui DH17B3
SEM 818F
Engine Make
Weichai WD10G190E214
Weichai WD10G190E214
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
140kW (188 HP) @ 1900 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
NA
Max Forward Speed
10 (0-10) km/h
8.0 km/h
Max Drawbar Pull
288.8 kN
NA
Fuel Tank
352 L
410 L
Overall Width
3400 mm
3167 mm
Track Shoe Width
510 mm
510 mm
Ground Bearing Pressure
65 kPa
57 kPa (STD)
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Ripper
Optional
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Key highlights: Shantui DH17B3 vs SEM 818F Dozer
Shantui DH17B3
SEM 818F
Engine Make
Weichai WD10G190E214
Weichai WD10G190E214
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
140kW (188 HP) @ 1900 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
NA
Max Forward Speed
10 (0-10) km/h
8.0 km/h
Max Drawbar Pull
288.8 kN
NA
Fuel Tank
352 L
410 L
Overall Width
3400 mm
3167 mm
Track Shoe Width
510 mm
510 mm
Ground Bearing Pressure
65 kPa
57 kPa (STD)
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Ripper
Optional
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Full specifications: Shantui DH17B3 vs SEM 818F Dozer
Questions buyers ask about the Shantui DH17B3 vs SEM 818F
Ans.
The SEM 818F has more engine power, rated at 188 HP against 170 HP on the Shantui DH17B3. That gap gives the 818F a bit more push on tough grading passes.
Ans.
The SEM 818F sinks less. Its ground bearing pressure is lower than the Shantui DH17B3's, which helps on freshly filled or loose ground where a heavier footprint can dig in.
Ans.
The Shantui DH17B3 blade holds more. It is rated at 4.7 cubic metres against 4.3 cubic metres on the SEM 818F. That extra volume means fewer passes to move the same pile of material.
Ans.
Yes. The SEM 818F ripper is a mandatory attachment, not an option, and it penetrates 590 mm into the ground. The Shantui DH17B3 offers a ripper as an optional extra instead, so you add one only if your site needs it.
Ans.
The SEM 818F carries a bigger fuel tank than the Shantui DH17B3, so it can run longer on a full tank. On sites far from a fuel point, that longer range saves time during the shift.
Ans.
The Shantui DH17B3 has a little more ground clearance than the SEM 818F. Its blade also drops deeper below ground level, which helps when digging out low spots or drainage lines.
Shantui DH17B3 Vs SEM 818F - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH17B3 Vs SEM 818F price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
