Shantui DH17B3 vs LiuGong B230: the two differ on 63 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Cummins 230 HP), Price (₹80 – 95 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,730 kg vs 24,540 kg), Weight (17730 kg vs 24540 kg). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH17B3
LiuGong B230
Shantui DH17B3
VS
LiuGong B230
Dozer
Shantui DH17B3 vs LiuGong B230: the two differ on 63 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Cummins 230 HP), Price (₹80 – 95 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,730 kg vs 24,540 kg), Weight (17730 kg vs 24540 kg). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH17B3
₹80 – 95 Lakh
LiuGong B230
₹1.10 – 1.30 Cr
Particulars
Shantui DH17B3
LiuGong B230
LiuGong B230 vs Shantui DH17B3: how much size do you actually need?
The LiuGong B230 is bigger everywhere that matters for bulk pushing: 230 HP against 170 HP, 24,540 kg against 17,730 kg, and a 7.8 m³ blade against 4.7 m³ on the Shantui DH17B3. It runs a licensed Cummins engine on conventional powershift, with no ripper listed. The DH17B3 is the smaller, more manoeuvrable machine, driven by a Linde hydrostatic system with intelligent speed-load matching, and it can be fitted with an optional ripper for harder patches. It also has slightly more ground clearance than the B230.
Choose the B230 where the job is mainly bulk pushing and site development on firm ground, and daily output depends on blade volume. Choose the DH17B3 where the site is tighter, ripping may be needed occasionally, and a hydrostatic drive's smooth control counts for more than raw size. Both are construction dozers in our dozer range, listed on the dozer comparison hub. New to dozers? Read the bulldozer guide.
LiuGong B230
Pros:
More powerful at 230 HP against the DH17B3's 170 HP
Bigger blade at 7.8 m³, moves more material per pass
Heavier at 24,540 kg, giving more mass for pure pushing power
Larger 480-litre fuel tank for longer shifts
230 HP Cummins NT855 engine, widely serviced across India
Cons:
No ripper option listed, so it cannot break up hard ground on its own
Slightly less ground clearance than the DH17B3, at 405 mm against 410 mm
Conventional powershift transmission, without hydrostatic smoothness
No published drawbar pull figure to compare directly against the DH17B3
Shantui DH17B3
Pros:
Rated drawbar pull of 288.8 kN for a machine this size
Optional ripper available for harder or mixed ground
Slightly more ground clearance at 410 mm
Dual-circuit Linde hydrostatic drive with intelligent speed-load matching
ECO and Driving Response modes let the driver trade fuel use against output
Cons:
Smaller blade at 4.7 m³, moves less material per pass than the B230
Less powerful at 170 HP and lighter at 17,730 kg
Smaller 352-litre fuel tank than the B230
Newer hydrostatic architecture with less long-running field history in India than conventional powershift dozers
Pros:
Cons:
Closing Recommendation
The LiuGong B230 is the steadier choice for bulk pushing and site development on firm ground, where a bigger blade and more weight decide daily output. The Shantui DH17B3 fits tighter sites and mixed-ground work, since its hydrostatic drive and optional ripper give it more flexibility than a bigger, simpler pusher. So match the machine to your work: LiuGong B230 for bulk pushing and large site development, Shantui DH17B3 for tighter sites that occasionally need ripping.
Shantui DH17B3 Vs LiuGong B230 Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
Agency review
Planning to buy the Shantui DH17B3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the LiuGong B230 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
LiuGong B230 vs Shantui DH17B3: how much size do you actually need?
The LiuGong B230 is bigger everywhere that matters for bulk pushing: 230 HP against 170 HP, 24,540 kg against 17,730 kg, and a 7.8 m³ blade against 4.7 m³ on the Shantui DH17B3. It runs a licensed Cummins engine on conventional powershift, with no ripper listed. The DH17B3 is the smaller, more manoeuvrable machine, driven by a Linde hydrostatic system with intelligent speed-load matching, and it can be fitted with an optional ripper for harder patches. It also has slightly more ground clearance than the B230.
Choose the B230 where the job is mainly bulk pushing and site development on firm ground, and daily output depends on blade volume. Choose the DH17B3 where the site is tighter, ripping may be needed occasionally, and a hydrostatic drive's smooth control counts for more than raw size. Both are construction dozers in our dozer range, listed on the dozer comparison hub. New to dozers? Read the bulldozer guide.
LiuGong B230
Pros:
More powerful at 230 HP against the DH17B3's 170 HP
Bigger blade at 7.8 m³, moves more material per pass
Heavier at 24,540 kg, giving more mass for pure pushing power
Larger 480-litre fuel tank for longer shifts
230 HP Cummins NT855 engine, widely serviced across India
Cons:
No ripper option listed, so it cannot break up hard ground on its own
Slightly less ground clearance than the DH17B3, at 405 mm against 410 mm
Conventional powershift transmission, without hydrostatic smoothness
No published drawbar pull figure to compare directly against the DH17B3
Shantui DH17B3
Pros:
Rated drawbar pull of 288.8 kN for a machine this size
Optional ripper available for harder or mixed ground
Slightly more ground clearance at 410 mm
Dual-circuit Linde hydrostatic drive with intelligent speed-load matching
ECO and Driving Response modes let the driver trade fuel use against output
Cons:
Smaller blade at 4.7 m³, moves less material per pass than the B230
Less powerful at 170 HP and lighter at 17,730 kg
Smaller 352-litre fuel tank than the B230
Newer hydrostatic architecture with less long-running field history in India than conventional powershift dozers
Pros:
Cons:
Closing Recommendation
The LiuGong B230 is the steadier choice for bulk pushing and site development on firm ground, where a bigger blade and more weight decide daily output. The Shantui DH17B3 fits tighter sites and mixed-ground work, since its hydrostatic drive and optional ripper give it more flexibility than a bigger, simpler pusher. So match the machine to your work: LiuGong B230 for bulk pushing and large site development, Shantui DH17B3 for tighter sites that occasionally need ripping.
Shantui DH17B3 Vs LiuGong B230 Dozer Price, Technical Specifications & Features
The Shantui DH17B3 is a 17.7-tonne construction crawler dozer with a 170 HP engine and 4.7 m³ blade. Its 288.8 kN drawbar pull provides useful force through compacted subgrade, while an optional ripper adds capability when harder ground appears. Ground bearing pressure of 65 kPa suits standard construction surfaces. Rated gradeability reaches 30 degrees, supporting moderately sloped sites. Ground clearance is 410 mm, and the 352-litre fuel tank supports standard working shifts. The DH17B3 sits close to the DH16B3 and SD16E, but its larger blade gives it more material-moving capacity. Road-base preparation, general earthwork and site clearing are suitable applications. The Shantui DH17B3 bulldozer price is ₹80 lakh to ₹95 lakh. Rental operators can consider this dozer machine as a mid-size workhorse for regular grading. Contractors can also compare its blade volume and drawbar pull against the nearby Shantui models. The optional ripper provides flexibility without changing its main construction role. Its operating weight keeps it below the larger DH24C3. Buyers who need more material movement but still want a manageable construction machine can consider the DH17B3. It offers a practical balance for contractors handling regular earthwork, road preparation and site development.
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
63 differ · 14 identical
Key highlights: Shantui DH17B3 vs LiuGong B230 Dozer
Shantui DH17B3
LiuGong B230
Engine Make
Weichai WD10G190E214
Chongqing Cummins NT855C280S20
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
172 kW (230 HP) @ 2000 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
1050 Nm @ 1400 rpm
Max Forward Speed
10 (0-10) km/h
11.82 km/h
Max Drawbar Pull
288.8 kN
NA
Fuel Tank
352 L
480 L
Overall Width
3400 mm
3725 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
65 kPa
83.1 kPa
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
Straight (referenced)
Ripper
Optional
NA
AC Cabin
NA
NA
Warranty
12 Months
12 months / 2000 hrs
Key highlights: Shantui DH17B3 vs LiuGong B230 Dozer
Shantui DH17B3
LiuGong B230
Engine Make
Weichai WD10G190E214
Chongqing Cummins NT855C280S20
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
172 kW (230 HP) @ 2000 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
1050 Nm @ 1400 rpm
Max Forward Speed
10 (0-10) km/h
11.82 km/h
Max Drawbar Pull
288.8 kN
NA
Fuel Tank
352 L
480 L
Overall Width
3400 mm
3725 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
65 kPa
83.1 kPa
Blade Options
Coal blade 6.2 m3 and straight-tilt blade 3.6 m3 also available
Straight (referenced)
Ripper
Optional
NA
AC Cabin
NA
NA
Warranty
12 Months
12 months / 2000 hrs
Full specifications: Shantui DH17B3 vs LiuGong B230 Dozer
Questions buyers ask about the Shantui DH17B3 vs LiuGong B230
Ans.
The LiuGong B230 is more powerful, at 230 HP against the DH17B3's 170 HP. It is also heavier, at 24,540 kg against 17,730 kg, and carries a bigger 7.8 m³ blade against 4.7 m³, so it moves more material per pass.
Ans.
The Shantui DH17B3 offers an optional ripper for harder ground. The LiuGong B230 has no ripper option listed, so it stays a pure pushing and grading machine without a way to break up compacted or rocky patches.
Ans.
The Shantui DH17B3 lists a rated drawbar pull of 288.8 kN. The LiuGong B230's drawbar pull is not published, so buyers should judge its pushing force mainly from its weight and blade size instead.
Ans.
The Shantui DH17B3 has slightly more ground clearance, at 410 mm against the B230's 405 mm. The difference is small, but it can matter on uneven, rutted or freshly filled ground where the underside needs more room.
Ans.
The Shantui DH17B3 does. Its dual-circuit Linde hydrostatic drive with intelligent speed-load matching gives stepless speed control. The LiuGong B230 uses a conventional powershift transmission instead, which is simpler to maintain but less refined to operate.
Ans.
The LiuGong B230 holds more fuel, with a 480-litre tank against the DH17B3's 352 litres. That supports longer stretches of continuous bulk pushing before a refuel stop, useful on larger sites far from a fuel bowser.
Shantui DH17B3 Vs LiuGong B230 - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH17B3 Vs LiuGong B230 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
